Chapter 87 covers all land motor vehicles and their parts and accessories, other than railway vehicles, including automobiles, motorcycles, bicycles, trailers, etc. The core characteristic of this chapter is that the goods must be related to complete motor vehicles or non-motor vehicles (such as bicycles) and their dedicated parts. Motorcycles and their parts are classified under headings 8711 to 8714, of which 8714 is dedicated to parts for motorcycles and bicycles and does not include general fasteners or electrical components (these are classified under other chapters). Heading 8714 covers parts and accessories for motorcycles (including mopeds) and bicycles (including invalid carriages). Specifically, it includes: frames, forks, rims, spokes, hubs, brakes, transmissions, saddles, pedals, cranks, chains, handlebars and handle grips, etc. Note, however, that this heading does not include engine parts (heading 8407 or 8408), electrical lighting equipment (heading 8512), or general rubber or plastic articles (classified according to material). Code 871437 is a six-digit subheading. The first 2 digits '87' represent Chapter 87: Vehicles and their parts and accessories, other than railway vehicles. Digits 3-4 '14' represent heading 8714: Parts and accessories for motorcycles and bicycles. Digits 5-6 '37' represent subheading 8714.37: Handlebars and handle grips for motorcycles. This subheading is further subdivided into: 8714.37.10 (handlebars) and 8714.37.90 (handle grips), but China Customs usually uses ten-digit codes; the six digits here are internationally standardized. Note that if handle grips are imported separately as rubber or plastic articles, they may be classified according to material, but when they are dedicated motorcycle parts and are declared together with the handlebars, they are classified under this subheading. Motorcycle handlebars and handle grips are dedicated parts of motorcycles, directly installed on the handlebar steering system for control and gripping. They are not general hardware items (such as screws of heading 7318) or general rubber articles (heading 4016), nor are they motorcycle engine parts (heading 8407/8408) or electrical components (heading 8512). Therefore, according to the principles of parts classification, they are classified under heading 8714, which is dedicated to motorcycle parts, and further under subheading 8714.37.

Product name: Declare the Chinese and foreign-language names of the goods, specifying 'motorcycle handlebars' or 'motorcycle handle grips' and avoiding the general term 'motorcycle parts'. Material: State the main material of the handlebars or handle grips, such as aluminum alloy, steel pipe, rubber, plastic, silicone, etc. Different materials affect classification (but remain under 8714). Brand: Fill in the brand name (if no brand, write 'none'). Brand affects price and intellectual property but does not affect the HS code. Model: Fill in the manufacturer's or industry-standard model to facilitate customs identification of specific specifications. Applicable vehicle model: Indicate the applicable motorcycle type, such as two-wheeled motorcycle, off-road motorcycle, scooter, etc., as well as the displacement range. Whether it is a complete set of parts: State whether the handlebars and handle grips are declared together as a complete set of parts; if separate, they must be classified separately. GTIN: Fill in the Global Trade Item Number if available; otherwise write 'none'. Origin: Fill in the country (region) of production or manufacture of the goods, which affects tariffs and trade policy. Product name: Motorcycle aluminum alloy handlebars (with rubber handle grips) Material: Handlebars are aluminum alloy, handle grips are rubber Brand: Unbranded Model: MT-125-2024 Applicable vehicle model: Two-wheeled motorcycle, displacement 125cc Whether it is a complete set of parts: Yes, handlebars and handle grips declared as a set GTIN: None Origin: China Remarks: This product is a dedicated motorcycle part used for steering control. Declaring handle grips separately as rubber articles (4016), resulting in incorrect classification. Failing to indicate 'for motorcycles', leading to misclassification as bicycle parts (8714.9) or general hardware. When handlebars and handle grips are declared separately, failing to provide proof of their relationship, which may result in separate classification.

The core basis for classification is the interpretation of heading 8714 in the Import and Export Tariff and the HS Explanatory Notes: this heading covers dedicated parts for motorcycles and bicycles but excludes general parts. Motorcycle handlebars and handle grips are dedicated components of the motorcycle steering system, are irreplaceable, and are usually used in conjunction with a complete motorcycle. According to General Rules of Interpretation 1 and 6, they should be classified under 8714.37. If handle grips are imported separately and are clearly general rubber sleeves, they may be classified under Chapter 40 according to material, but if they are declared together with handlebars or clearly designed for motorcycles, they remain under 8714.37. 871410 Motorcycle saddles: Saddles are the rider's seat and are motorcycle parts, but they are classified under 8714.10 and have a different function from handlebars, so they must not be confused. 871419 Other motorcycle parts: This subheading covers motorcycle parts not elsewhere specified, such as mudguards, brackets, etc. Handlebars have a dedicated subheading 8714.37 and should be classified there first. 871420 Parts for invalid carriages: Applies to parts for invalid carriages, unrelated to motorcycle handlebars, and with a different use. 871491 Bicycle frames: Bicycle parts are classified under 8714.9, but handlebars for bicycles are classified under 8714.99, while handlebars for motorcycles are classified under 8714.37. 401699 Vulcanized rubber articles: If handle grips are imported separately as general rubber sleeves without indicating motorcycle-specific use, they may be classified under this code, but dedicated handle grips remain under 8714.37. Is the product clearly for motorcycle-specific use? Are the handlebars and handle grips declared as a set? Does the material affect classification? Is it confused with bicycle parts? Have sufficient declaration elements been provided?

Which HS code should motorcycle handlebars and handle grips be classified under? Motorcycle handlebars and handle grips are classified under HS code 8714.37. This code is dedicated to handlebars and handle grips for motorcycles and bicycles, and motorcycle handlebars and handle grips fall under the six-digit subheading 8714.37. If handle grips are imported separately and are general rubber articles, they may be classified under 4016, but as dedicated motorcycle parts declared together with handlebars, they should be classified under 8714.37. How do you distinguish motorcycle handlebars from bicycle handlebars? Mainly based on the applicable vehicle model. Motorcycle handlebars are usually thicker, have mounting structures for throttle control, brake levers, etc., and are mostly made of aluminum alloy or steel pipe; bicycle handlebars are thinner and are mostly made of aluminum alloy or carbon fiber. When declaring, indicate 'for motorcycles' or 'for bicycles' so that customs can classify correctly. Motorcycle handlebars are classified under 8714.37, and bicycle handlebars under 8714.99. If handle grips are imported separately, are they always classified under 8714.37? Not necessarily. If the handle grips are general rubber sleeves, not marked for motorcycle-specific use, and imported separately, they may be classified under Chapter 40 according to material (such as 4016.99). However, if the handle grips are declared together with motorcycle handlebars, or are clearly designed for motorcycles, they remain under 8714.37. It is recommended to provide proof of use or declare them together with the handlebars. What declaration elements are required when declaring motorcycle handlebars? Product name, material, brand, model, applicable vehicle model, whether it is a complete set of parts, GTIN, origin, etc. are required. Among these, 'applicable vehicle model' and 'whether it is a complete set of parts' are key, helping customs determine whether it is a dedicated motorcycle part. If the handlebars and handle grips are a set, this should be indicated. If the handlebars are made of carbon fiber, will the HS code change? No. HS code 8714.37 is based on use rather than material. As long as the handlebars are for motorcycle-specific use, regardless of whether the material is aluminum alloy, steel pipe, or carbon fiber, they are classified under 8714.37. However, material affects the completion of declaration elements and customs valuation. What is the import tariff rate for motorcycle handlebars and handle grips? The specific rate must be checked in the latest Import and Export Tariff or customs database, as rates may vary by country, trade agreement, and annual adjustments. It is recommended to use the General Administration of Customs' 'HS Code Query' system or consult a customs broker. Typically, the most-favored-nation rate is between 3% and 10%, but please refer to official data. How are motorcycle handlebars declared for cross-border e-commerce retail export? Cross-border e-commerce retail exports must be declared in accordance with customs requirements, usually using the 'Cross-border E-commerce Export Unified Version' system. The HS code remains 8714.37, but attention must be paid to declared value, quantity, etc. For small parcel exports, simplified declaration may apply, but it is recommended to declare the product name and code truthfully to avoid returns or penalties due to classification errors. If the handlebars and handle grips are packaged separately but imported in the same batch, how are they classified? If the handlebars and handle grips are packaged separately but imported in the same batch and are clearly intended to be used together, they should be classified separately: handlebars under 8714.37, and handle grips, if motorcycle-specific, also under 8714.37. However, if the handle grips are general rubber sleeves, they may be classified under 4016.99. It is recommended to indicate the relationship between the two on the customs declaration or declare them as a complete set of parts to simplify procedures.