Chapter 87 covers motor vehicles for land use other than railway or tramway rolling stock, tractors, motorcycles, bicycles, invalid carriages, etc., and their parts and accessories. The core of this chapter is the distinction between 'complete vehicles' and 'specialized parts'. Motorcycles and their parts are mainly classified under 8711 and 8714. Heading 8714 is specifically for parts and accessories of motorcycles, bicycles, and other non-motorized or motorized two-wheeled vehicles and invalid carriages, and does not include parts such as engines, electrical lighting, etc., which are separately listed. Heading 8714 includes parts and accessories for motorcycles (including mopeds), bicycles, invalid carriages, and other similar vehicles. Specifically, it covers frames, forks, rims, spokes, hubs, brakes, saddles, pedals, chains, inner tubes, etc. However, note: if the inner tube is made of rubber, it is still classified under this chapter because it is a special part for motorcycles, not a general rubber product. Under this heading, it is further subdivided by vehicle type and part type. The first 2 digits '87' represent Chapter 87 (Vehicles and their parts and accessories, other than railway vehicles). The 3rd-4th digits '14' represent heading 8714 (Parts and accessories for motorcycles, bicycles, and other non-motorized or motorized two-wheeled vehicles and invalid carriages). The 5th-6th digits '20' are a subheading under 8714, specifically referring to 'inner tubes for motorcycle tires'. Note: under 8714 there are also 8714.10 (motorcycle saddles), 8714.20 (inner tubes for motorcycles), 8714.30 (other parts for motorcycles), etc. Therefore, 871420 is a six-digit subheading specifically for motorcycle inner tubes, not bicycle inner tubes (bicycle inner tubes are classified under 8714.99 or other). This commodity is a rubber inner tube for motorcycles, which is a special part for motorcycles, not a general rubber product. According to HS classification rules, motorcycle parts are preferentially classified under 8714, rather than under Chapter 40 as rubber products. At the same time, an inner tube is a component of a tire, but outer tires are usually classified under 4011, while inner tubes, if specially for motorcycles, are classified under 8714.20. Therefore, 871420 is the correct classification.
Chapter
Chapter 87 covers motor vehicles for land use other than railway or tramway rolling stock, tractors, motorcycles, bicycles, invalid carriages, etc., and their parts and accessories. The core of this chapter is the distinction between 'complete vehicles' and 'specialized parts'. Motorcycles and their parts are mainly classified under 8711 and 8714. Heading 8714 is specifically for parts and accessories of motorcycles, bicycles, and other non-motorized or motorized two-wheeled vehicles and invalid carriages, and does not include parts such as engines, electrical lighting, etc., which are separately listed.
Heading
Heading 8714 includes parts and accessories for motorcycles (including mopeds), bicycles, invalid carriages, and other similar vehicles. Specifically, it covers frames, forks, rims, spokes, hubs, brakes, saddles, pedals, chains, inner tubes, etc. However, note: if the inner tube is made of rubber, it is still classified under this chapter because it is a special part for motorcycles, not a general rubber product. Under this heading, it is further subdivided by vehicle type and part type.
Digit Breakdown
The first 2 digits '87' represent Chapter 87 (Vehicles and their parts and accessories, other than railway vehicles). The 3rd-4th digits '14' represent heading 8714 (Parts and accessories for motorcycles, bicycles, and other non-motorized or motorized two-wheeled vehicles and invalid carriages). The 5th-6th digits '20' are a subheading under 8714, specifically referring to 'inner tubes for motorcycle tires'. Note: under 8714 there are also 8714.10 (motorcycle saddles), 8714.20 (inner tubes for motorcycles), 8714.30 (other parts for motorcycles), etc. Therefore, 871420 is a six-digit subheading specifically for motorcycle inner tubes, not bicycle inner tubes (bicycle inner tubes are classified under 8714.99 or other).
Classification Basis
This commodity is a rubber inner tube for motorcycles, which is a special part for motorcycles, not a general rubber product. According to HS classification rules, motorcycle parts are preferentially classified under 8714, rather than under Chapter 40 as rubber products. At the same time, an inner tube is a component of a tire, but outer tires are usually classified under 4011, while inner tubes, if specially for motorcycles, are classified under 8714.20. Therefore, 871420 is the correct classification.
📝 Declaration Elements
Product Name: The Chinese and foreign language names of the declared commodity should accurately describe it as 'inner tube for motorcycle tires' or 'motorcycle inner tube', avoiding the general term 'rubber inner tube'. Material: The main material of the inner tube, usually butyl rubber or natural rubber. The specific rubber type must be indicated so that customs can determine classification. Use: Clearly used for motorcycle tires. Must indicate 'for motorcycle use', and vague expressions such as 'for vehicle use' cannot be written. Brand: Fill in the brand name of the inner tube (if no brand, fill in 'no brand'). Brand does not affect classification but is a declaration element. Model: Fill in the specification and model of the inner tube, such as '3.00-18', '110/90-16', etc., to facilitate customs identification of the specific use. Applicable Vehicle Type: Indicate that it is suitable for motorcycles (including mopeds). The displacement or vehicle type can be further specified to distinguish it from bicycle inner tubes. Whether Reinforced: Indicate whether the inner tube has been reinforced (e.g., thickened, puncture-resistant). This is a descriptive element that does not affect classification but must be declared truthfully. Customs declaration example:
Product Name: Inner tube for motorcycle tires
Material: Butyl rubber
Use: For motorcycle tires
Brand: Cheng Shin
Model: 3.00-18
Applicable Vehicle Type: Motorcycle
Whether Reinforced: No
Specification: 3.00-18
Quantity: 1000 pieces
Unit: Piece
Country of Origin: China
Remarks: None Misclassifying motorcycle inner tubes under 4013 (rubber inner tubes), ignoring their special part attribute. Failure to indicate 'for motorcycle use', leading to confusion with bicycle inner tubes (8714.99). Material declared as 'rubber' is too general and may raise classification doubts.
Product Name
The Chinese and foreign language names of the declared commodity should accurately describe it as 'inner tube for motorcycle tires' or 'motorcycle inner tube', avoiding the general term 'rubber inner tube'.
⚠️ Only writing 'inner tube' or 'rubber inner tube', without indicating for motorcycle use.
Material
The main material of the inner tube, usually butyl rubber or natural rubber. The specific rubber type must be indicated so that customs can determine classification.
⚠️ Only writing 'rubber', without specifying the type.
Use
Clearly used for motorcycle tires. Must indicate 'for motorcycle use', and vague expressions such as 'for vehicle use' cannot be written.
⚠️ Writing 'for tire use' or 'for motor vehicle use', leading to classification disputes.
Brand
Fill in the brand name of the inner tube (if no brand, fill in 'no brand'). Brand does not affect classification but is a declaration element.
⚠️ Brand inconsistent with actual or omitted.
Model
Fill in the specification and model of the inner tube, such as '3.00-18', '110/90-16', etc., to facilitate customs identification of the specific use.
⚠️ Model filled in incompletely or inconsistent with the actual product.
Applicable Vehicle Type
Indicate that it is suitable for motorcycles (including mopeds). The displacement or vehicle type can be further specified to distinguish it from bicycle inner tubes.
⚠️ Vehicle type not indicated, leading to misclassification as bicycle inner tube.
Whether Reinforced
Indicate whether the inner tube has been reinforced (e.g., thickened, puncture-resistant). This is a descriptive element that does not affect classification but must be declared truthfully.
⚠️ Failure to declare or incorrect declaration of reinforcement.
Example： Customs declaration example:
Product Name: Inner tube for motorcycle tires
Material: Butyl rubber
Use: For motorcycle tires
Brand: Cheng Shin
Model: 3.00-18
Applicable Vehicle Type: Motorcycle
Whether Reinforced: No
Specification: 3.00-18
Quantity: 1000 pieces
Unit: Piece
Country of Origin: China
Remarks: None
Common Mistakes：
Misclassifying motorcycle inner tubes under 4013 (rubber inner tubes), ignoring their special part attribute.
Failure to indicate 'for motorcycle use', leading to confusion with bicycle inner tubes (8714.99).
Material declared as 'rubber' is too general and may raise classification doubts.
🎯 Classification Logic
Core criteria for classification: 1) Whether the commodity is a special part for motorcycles; if general, it is classified under other chapters; 2) The material and use of the inner tube; if made of rubber and specially for motorcycles, it is classified under 8714.20; 3) Refer to the Explanatory Notes to the Harmonized System for heading 8714, which clarifies that motorcycle inner tubes belong to this heading. At the same time, note the difference between inner tubes and outer tires; outer tires are usually classified under 4011, while inner tubes, if specially for motorcycles, are classified under 8714. 4013 Rubber inner tubes: 4013 is for general rubber inner tubes, applicable to various vehicles, while 8714.20 specifically refers to motorcycle inner tubes. If the inner tube is clearly for motorcycles, it should be classified under 8714.20, not 4013. 4011 Rubber outer tires: 4011 is for rubber outer tires, including motorcycle outer tires, but inner tubes are not outer tires, so motorcycle inner tubes are not classified under 4011. 8714.99 Other motorcycle parts: 8714.99 is for other motorcycle parts, but inner tubes are separately listed under 8714.20, so they are not classified under 8714.99. 8714.10 Motorcycle saddles: 8714.10 is for motorcycle saddles, unrelated to inner tubes, but under the same heading 8714, so attention must be paid to subheading distinction. 8716 Trailers and semi-trailers: 8716 is for trailer parts. If the inner tube is used for trailers, it may be classified under 8716, but motorcycle inner tubes are still classified under 8714.20. Is it clearly for motorcycle use only? Is the material rubber? Is it distinguished from bicycle inner tubes? Are general rubber inner tubes excluded? Does the model match the motorcycle?
Basis
Core criteria for classification: 1) Whether the commodity is a special part for motorcycles; if general, it is classified under other chapters; 2) The material and use of the inner tube; if made of rubber and specially for motorcycles, it is classified under 8714.20; 3) Refer to the Explanatory Notes to the Harmonized System for heading 8714, which clarifies that motorcycle inner tubes belong to this heading. At the same time, note the difference between inner tubes and outer tires; outer tires are usually classified under 4011, while inner tubes, if specially for motorcycles, are classified under 8714.
Confused Codes：
4013 - Rubber inner tubes
4013 is for general rubber inner tubes, applicable to various vehicles, while 8714.20 specifically refers to motorcycle inner tubes. If the inner tube is clearly for motorcycles, it should be classified under 8714.20, not 4013.
4011 - Rubber outer tires
4011 is for rubber outer tires, including motorcycle outer tires, but inner tubes are not outer tires, so motorcycle inner tubes are not classified under 4011.
8714.99 - Other motorcycle parts
8714.99 is for other motorcycle parts, but inner tubes are separately listed under 8714.20, so they are not classified under 8714.99.
8714.10 - Motorcycle saddles
8714.10 is for motorcycle saddles, unrelated to inner tubes, but under the same heading 8714, so attention must be paid to subheading distinction.
8716 - Trailers and semi-trailers
8716 is for trailer parts. If the inner tube is used for trailers, it may be classified under 8716, but motorcycle inner tubes are still classified under 8714.20.
Self-Check：
✓ Is it clearly for motorcycle use only?
✓ Is the material rubber?
✓ Is it distinguished from bicycle inner tubes?
✓ Are general rubber inner tubes excluded?
✓ Does the model match the motorcycle?
❓ FAQ
What is the difference in HS codes between motorcycle inner tubes and bicycle inner tubes? Motorcycle inner tubes are classified under 8714.20, and bicycle inner tubes under 8714.99 (or other subheadings). The key difference is the applicable vehicle type: motorcycle inner tubes are for motorcycles, bicycle inner tubes for bicycles. If the inner tube is general, it may be classified under 4013. When declaring, the applicable vehicle type must be indicated. How to determine whether an inner tube is for motorcycles or general use? Based on the inner tube's specifications, sales packaging, brand promotion, etc. If the model is a common motorcycle specification such as 3.00-18, 110/90-16, and the packaging indicates for motorcycle use, it is classified under 8714.20. If it is a general inner tube with no specific vehicle type, it is classified under 4013. What are the declaration elements for motorcycle inner tubes? The main declaration elements include: product name, material, use, brand, model, applicable vehicle type, whether reinforced, etc. Among these, use and applicable vehicle type are key and must clearly state 'for motorcycle use'. The material must specify the specific rubber type. If the inner tube is used for electric vehicles, which code should it be classified under? If the electric vehicle falls under the category of motorcycles (such as electric motorcycles), the inner tube is classified under 8714.20; if it falls under the category of bicycles (such as electric bicycles), it is classified under 8714.99. It must be determined based on the vehicle type. If it is a general inner tube, it is classified under 4013. How to check the tax rate for motorcycle inner tubes? Tax rates are adjusted according to national policies. It is recommended to query the latest tax rate by entering HS code 871420 through the General Administration of Customs website, China International Trade Single Window, or professional tariff query tools. Note that different countries of origin may apply different agreement rates. After classification under 871420, what are the regulatory conditions? Regulatory conditions vary by country and may typically involve import licenses, compulsory product certification (such as CCC), etc. For specifics, consult the latest 'Customs Import and Export Tariff' and regulatory condition codes. It is recommended to consult the local customs or a professional customs broker. Can motorcycle inner tubes and motorcycle outer tires be classified under the same code? No. Motorcycle outer tires are classified under 4011, and inner tubes under 8714.20. Although the materials are the same, their functions are different, and the HS codes are different. They must be declared separately to avoid confusion. If the inner tube is made of butyl rubber, will the classification be different? No. Whether butyl rubber or natural rubber, as long as it is specially for motorcycles, it is classified under 8714.20. The material does not affect subheading classification, but it must be truthfully filled in the declaration elements.
Q: What is the difference in HS codes between motorcycle inner tubes and bicycle inner tubes?
A: Motorcycle inner tubes are classified under 8714.20, and bicycle inner tubes under 8714.99 (or other subheadings). The key difference is the applicable vehicle type: motorcycle inner tubes are for motorcycles, bicycle inner tubes for bicycles. If the inner tube is general, it may be classified under 4013. When declaring, the applicable vehicle type must be indicated.
Q: How to determine whether an inner tube is for motorcycles or general use?
A: Based on the inner tube's specifications, sales packaging, brand promotion, etc. If the model is a common motorcycle specification such as 3.00-18, 110/90-16, and the packaging indicates for motorcycle use, it is classified under 8714.20. If it is a general inner tube with no specific vehicle type, it is classified under 4013.
Q: What are the declaration elements for motorcycle inner tubes?
A: The main declaration elements include: product name, material, use, brand, model, applicable vehicle type, whether reinforced, etc. Among these, use and applicable vehicle type are key and must clearly state 'for motorcycle use'. The material must specify the specific rubber type.
Q: If the inner tube is used for electric vehicles, which code should it be classified under?
A: If the electric vehicle falls under the category of motorcycles (such as electric motorcycles), the inner tube is classified under 8714.20; if it falls under the category of bicycles (such as electric bicycles), it is classified under 8714.99. It must be determined based on the vehicle type. If it is a general inner tube, it is classified under 4013.
Q: How to check the tax rate for motorcycle inner tubes?
A: Tax rates are adjusted according to national policies. It is recommended to query the latest tax rate by entering HS code 871420 through the General Administration of Customs website, China International Trade Single Window, or professional tariff query tools. Note that different countries of origin may apply different agreement rates.
Q: After classification under 871420, what are the regulatory conditions?
A: Regulatory conditions vary by country and may typically involve import licenses, compulsory product certification (such as CCC), etc. For specifics, consult the latest 'Customs Import and Export Tariff' and regulatory condition codes. It is recommended to consult the local customs or a professional customs broker.
Q: Can motorcycle inner tubes and motorcycle outer tires be classified under the same code?
A: No. Motorcycle outer tires are classified under 4011, and inner tubes under 8714.20. Although the materials are the same, their functions are different, and the HS codes are different. They must be declared separately to avoid confusion.
Q: If the inner tube is made of butyl rubber, will the classification be different?
A: No. Whether butyl rubber or natural rubber, as long as it is specially for motorcycles, it is classified under 8714.20. The material does not affect subheading classification, but it must be truthfully filled in the declaration elements.
⚠️ Disclaimer: HS code classification, declaration elements, tariff rates and regulatory conditions on this page are for reference only and do not constitute legal advice on customs classification. Tariff rates and regulations are subject to change; the latest announcements from the General Administration of Customs and on-site determinations shall prevail. Please consult professional customs brokers or customs authorities before import/export.