Chapter 87 covers vehicles other than railway or tramway rolling stock, and parts and accessories thereof, including tractors, motor vehicles for the transport of persons, goods vehicles, motorcycles, bicycles, wheelchairs, etc. This chapter is divided into headings by vehicle type and use, with the core being the distinction between complete vehicles and parts, and between motorized and non-motorized. Heading 8714, as a parts heading, specifically accommodates parts for various vehicles within Chapter 87, but attention must be paid to the fact that its subheading divisions strictly correspond to complete vehicle headings, to avoid misclassification into complete vehicles or parts of other chapters. Heading 8714 covers parts and accessories of motorcycles and cycles (including cycles fitted with an auxiliary engine, i.e., mopeds). Specifically includes brakes, gearboxes, wheels, frames, steering mechanisms, silencers, clutches, saddles, etc. However, note that this heading does not include engine parts (classified under 8409 or 8407), electrical lighting equipment (classified under 8512), or general rubber tires (classified under 4011), etc. Code 871410 is a six-digit subheading. The first 2 digits '87' represent Chapter 87, i.e., vehicles and their parts and accessories (excluding railway vehicles). Digits 3-4 '14' represent heading 8714, i.e., parts and accessories of motorcycles and cycles fitted with an auxiliary engine. Digits 5-6 '10' represent subheading 871410, specifically parts and accessories of motorcycles (including mopeds). Among these, '10' is the first subheading under heading 8714, alongside 871420 (parts of vehicles for persons with disabilities), 871430 (parts of non-motorized cycles), etc. Therefore, 871410 applies only to parts of motorcycles and mopeds, not to ordinary bicycles or vehicles for persons with disabilities. This commodity is classified under 871410 because it is exclusively used for motorcycles or cycles fitted with an auxiliary engine, and falls within the category of parts or accessories. If it were a complete vehicle, it should be classified under 8711; if it were parts for ordinary bicycles, it should be classified under other subheadings of 8714 (such as 871430); if it were engine parts, it would be classified under 8409 or 8407. Therefore, the key to determination lies in the specificity of use and the vehicle type.
Chapter
Chapter 87 covers vehicles other than railway or tramway rolling stock, and parts and accessories thereof, including tractors, motor vehicles for the transport of persons, goods vehicles, motorcycles, bicycles, wheelchairs, etc. This chapter is divided into headings by vehicle type and use, with the core being the distinction between complete vehicles and parts, and between motorized and non-motorized. Heading 8714, as a parts heading, specifically accommodates parts for various vehicles within Chapter 87, but attention must be paid to the fact that its subheading divisions strictly correspond to complete vehicle headings, to avoid misclassification into complete vehicles or parts of other chapters.
Heading
Heading 8714 covers parts and accessories of motorcycles and cycles (including cycles fitted with an auxiliary engine, i.e., mopeds). Specifically includes brakes, gearboxes, wheels, frames, steering mechanisms, silencers, clutches, saddles, etc. However, note that this heading does not include engine parts (classified under 8409 or 8407), electrical lighting equipment (classified under 8512), or general rubber tires (classified under 4011), etc.
Digit Breakdown
Code 871410 is a six-digit subheading. The first 2 digits '87' represent Chapter 87, i.e., vehicles and their parts and accessories (excluding railway vehicles). Digits 3-4 '14' represent heading 8714, i.e., parts and accessories of motorcycles and cycles fitted with an auxiliary engine. Digits 5-6 '10' represent subheading 871410, specifically parts and accessories of motorcycles (including mopeds). Among these, '10' is the first subheading under heading 8714, alongside 871420 (parts of vehicles for persons with disabilities), 871430 (parts of non-motorized cycles), etc. Therefore, 871410 applies only to parts of motorcycles and mopeds, not to ordinary bicycles or vehicles for persons with disabilities.
Classification Basis
This commodity is classified under 871410 because it is exclusively used for motorcycles or cycles fitted with an auxiliary engine, and falls within the category of parts or accessories. If it were a complete vehicle, it should be classified under 8711; if it were parts for ordinary bicycles, it should be classified under other subheadings of 8714 (such as 871430); if it were engine parts, it would be classified under 8409 or 8407. Therefore, the key to determination lies in the specificity of use and the vehicle type.
📝 Declaration Elements
Product Name: The specific name of the declared commodity, such as 'brake for motorcycles', 'frame for mopeds', etc., which must be consistent with the actual goods, avoiding vague descriptions like 'motorcycle accessories'. Brand: Fill in the commodity brand, such as 'Honda', 'Yamaha', or 'no brand'; if no brand, indicate 'unbranded'. Model: Fill in the commodity model or part number, such as 'ABC-123', to facilitate customs identification of specific specifications. Applicable Vehicle Type: Specify the type of motorcycle or moped to which the part applies, such as 'applicable to 125cc motorcycles' or 'applicable to electric mopeds'. Material: Main material, such as 'steel', 'aluminum alloy', 'plastic', etc., which affects classification (e.g., plastic parts may be classified under Chapter 39). Use: The function of the part on the vehicle, such as 'braking', 'transmission', 'steering', etc., which must be specific. Processing Method: Such as 'forging', 'casting', 'injection molding', etc., which affects classification (e.g., unworked materials classified under Chapter 72). Whether in Complete Sets of Knocked-Down Parts: Indicate whether it is a complete set of knocked-down parts; if it is a complete set of knocked-down parts, it may be classified as a complete vehicle. Product Name: Hydraulic brake for motorcycles; Brand: Honda; Model: HB-2023; Applicable Vehicle Type: 125cc motorcycle; Material: Aluminum alloy; Use: For motorcycle braking system; Processing Method: Casting; Whether in Complete Sets of Knocked-Down Parts: No. Misclassifying motorcycle engine parts under 871410, when they should actually be classified under 8409 or 8407. Classifying general parts (such as bolts) under 871410, but if not exclusively used for motorcycles, they should be classified by material. Declaring complete sets of knocked-down parts as parts, but if they constitute the essential character of a complete vehicle, they should be classified under 8711.
Product Name
The specific name of the declared commodity, such as 'brake for motorcycles', 'frame for mopeds', etc., which must be consistent with the actual goods, avoiding vague descriptions like 'motorcycle accessories'.
⚠️ Incorrectly declaring as 'motorcycle parts' without specifying the type, resulting in ambiguous classification.
Brand
Fill in the commodity brand, such as 'Honda', 'Yamaha', or 'no brand'; if no brand, indicate 'unbranded'.
⚠️ Confusing brand with model, or omitting the brand leading to infringement risks.
Model
Fill in the commodity model or part number, such as 'ABC-123', to facilitate customs identification of specific specifications.
⚠️ Incomplete model entry or inconsistency with the actual goods, affecting inspection.
Applicable Vehicle Type
Specify the type of motorcycle or moped to which the part applies, such as 'applicable to 125cc motorcycles' or 'applicable to electric mopeds'.
⚠️ Incorrectly filling in as 'universal' or 'applicable to all vehicle types', leading to classification disputes.
Material
Main material, such as 'steel', 'aluminum alloy', 'plastic', etc., which affects classification (e.g., plastic parts may be classified under Chapter 39).
⚠️ Ignoring material description, leading to confusion with plastic or rubber products.
Use
The function of the part on the vehicle, such as 'braking', 'transmission', 'steering', etc., which must be specific.
⚠️ Use description too broad, such as 'for motorcycles', unable to distinguish specific parts.
Processing Method
Such as 'forging', 'casting', 'injection molding', etc., which affects classification (e.g., unworked materials classified under Chapter 72).
⚠️ Omitting processing method, leading to confusion with raw materials.
Whether in Complete Sets of Knocked-Down Parts
Indicate whether it is a complete set of knocked-down parts; if it is a complete set of knocked-down parts, it may be classified as a complete vehicle.
⚠️ Declaring complete sets of knocked-down parts as parts, leading to classification errors.
Example： Product Name: Hydraulic brake for motorcycles; Brand: Honda; Model: HB-2023; Applicable Vehicle Type: 125cc motorcycle; Material: Aluminum alloy; Use: For motorcycle braking system; Processing Method: Casting; Whether in Complete Sets of Knocked-Down Parts: No.
Common Mistakes：
Misclassifying motorcycle engine parts under 871410, when they should actually be classified under 8409 or 8407.
Classifying general parts (such as bolts) under 871410, but if not exclusively used for motorcycles, they should be classified by material.
Declaring complete sets of knocked-down parts as parts, but if they constitute the essential character of a complete vehicle, they should be classified under 8711.
🎯 Classification Logic
The core basis for classification is the Import and Export Tariff and HS Explanatory Notes. 871410 applies only to parts and accessories of motorcycles (including mopeds), and must be exclusively or principally used for such vehicles. When determining, consider: 1) whether the vehicle type is a motorcycle or moped; 2) whether the commodity is a part or accessory; 3) whether it excludes commodities specifically named in other chapters (such as engines, electrical devices). If the part is highly versatile, it should be classified by material. 8711 Motorcycles and cycles fitted with an auxiliary engine: 8711 is for complete vehicles, 871410 is for parts. If complete sets of knocked-down parts are imported and constitute the character of a complete vehicle, they should be classified under 8711. 8714 Parts of other vehicles: Under heading 8714, there are also 871420 (parts of vehicles for persons with disabilities), 871430 (parts of non-motorized cycles), etc., which need to be distinguished by vehicle type. 8409 Engine parts: Motorcycle engine parts (such as pistons, cylinders) are classified under 8409, not 871410. 8512 Electrical lighting equipment: Motorcycle lighting lamps, signal lamps, etc. are classified under 8512, not 871410. 4011 Rubber tires: Motorcycle rubber tires are classified under 4011, not 871410. Is the vehicle type a motorcycle or moped? Is the commodity a part or accessory? Is it exclusively or principally used for such vehicles? Does it exclude commodities named in other chapters? Do complete sets of knocked-down parts constitute the character of a complete vehicle?
Basis
The core basis for classification is the Import and Export Tariff and HS Explanatory Notes. 871410 applies only to parts and accessories of motorcycles (including mopeds), and must be exclusively or principally used for such vehicles. When determining, consider: 1) whether the vehicle type is a motorcycle or moped; 2) whether the commodity is a part or accessory; 3) whether it excludes commodities specifically named in other chapters (such as engines, electrical devices). If the part is highly versatile, it should be classified by material.
Confused Codes：
8711 - Motorcycles and cycles fitted with an auxiliary engine
8711 is for complete vehicles, 871410 is for parts. If complete sets of knocked-down parts are imported and constitute the character of a complete vehicle, they should be classified under 8711.
8714 - Parts of other vehicles
Under heading 8714, there are also 871420 (parts of vehicles for persons with disabilities), 871430 (parts of non-motorized cycles), etc., which need to be distinguished by vehicle type.
8409 - Engine parts
Motorcycle engine parts (such as pistons, cylinders) are classified under 8409, not 871410.
8512 - Electrical lighting equipment
Motorcycle lighting lamps, signal lamps, etc. are classified under 8512, not 871410.
4011 - Rubber tires
Motorcycle rubber tires are classified under 4011, not 871410.
Self-Check：
✓ Is the vehicle type a motorcycle or moped?
✓ Is the commodity a part or accessory?
✓ Is it exclusively or principally used for such vehicles?
✓ Does it exclude commodities named in other chapters?
✓ Do complete sets of knocked-down parts constitute the character of a complete vehicle?
❓ FAQ
Which HS code should motorcycle tires be classified under? Motorcycle tires should be classified under 4011 (new pneumatic rubber tires), not 871410. Because 871410 only covers motorcycle parts, but tires are specifically named in Chapter 40, and according to General Interpretative Rule 1, they should be classified under 4011. Are motorcycle engine parts classified under 871410? No. Motorcycle engine parts (such as pistons, crankshafts) should be classified under 8409 (parts exclusively or principally used for engines). 871410 only covers parts for complete motorcycles, not internal engine parts. Are parts for mopeds (electric bicycles) classified under 871410? Yes. 871410 explicitly includes parts and accessories of cycles fitted with an auxiliary engine (i.e., mopeds). However, note that if the electric motor of an electric bicycle is a separate component, it may be classified under 8501. Are motorcycle rearview mirrors classified under 871410? Motorcycle rearview mirrors are generally classified under 871410, as they are accessories of motorcycles. However, if the rearview mirror has functions such as electrical heating, other codes may need to be considered. Generally, specific naming takes priority. How to distinguish motorcycle parts from general parts? If the part is exclusively or principally used for motorcycles, classify under 871410; if it is a general part (such as standard bolts), classify by material (e.g., steel bolts under 7318). The basis for determination is the design, use of the part, and whether it is specifically named in 8714. How are complete sets of knocked-down motorcycle parts classified? If the complete set of knocked-down parts already possesses the essential character of a complete vehicle, it should be classified under 8711 (complete vehicle); if it does not constitute the character of a complete vehicle, it is classified as parts under 871410. The specific basis is General Interpretative Rule 2(a) and customs rulings. Are motorcycle batteries classified under 871410? No. Batteries should be classified under 8507 (lead-acid batteries, etc.), because Chapter 85 specifically names them. 871410 only covers parts exclusively for motorcycles, but batteries are general electrical components. Are motorcycle sprockets classified under 871410? Yes, motorcycle sprockets are transmission system parts exclusively used for motorcycles and should be classified under 871410. However, if the sprocket is a general mechanical part, it may be classified under 8483. Determination should be based on whether it is exclusively used for motorcycles.
Q: Which HS code should motorcycle tires be classified under?
A: Motorcycle tires should be classified under 4011 (new pneumatic rubber tires), not 871410. Because 871410 only covers motorcycle parts, but tires are specifically named in Chapter 40, and according to General Interpretative Rule 1, they should be classified under 4011.
Q: Are motorcycle engine parts classified under 871410?
A: No. Motorcycle engine parts (such as pistons, crankshafts) should be classified under 8409 (parts exclusively or principally used for engines). 871410 only covers parts for complete motorcycles, not internal engine parts.
Q: Are parts for mopeds (electric bicycles) classified under 871410?
A: Yes. 871410 explicitly includes parts and accessories of cycles fitted with an auxiliary engine (i.e., mopeds). However, note that if the electric motor of an electric bicycle is a separate component, it may be classified under 8501.
Q: Are motorcycle rearview mirrors classified under 871410?
A: Motorcycle rearview mirrors are generally classified under 871410, as they are accessories of motorcycles. However, if the rearview mirror has functions such as electrical heating, other codes may need to be considered. Generally, specific naming takes priority.
Q: How to distinguish motorcycle parts from general parts?
A: If the part is exclusively or principally used for motorcycles, classify under 871410; if it is a general part (such as standard bolts), classify by material (e.g., steel bolts under 7318). The basis for determination is the design, use of the part, and whether it is specifically named in 8714.
Q: How are complete sets of knocked-down motorcycle parts classified?
A: If the complete set of knocked-down parts already possesses the essential character of a complete vehicle, it should be classified under 8711 (complete vehicle); if it does not constitute the character of a complete vehicle, it is classified as parts under 871410. The specific basis is General Interpretative Rule 2(a) and customs rulings.
Q: Are motorcycle batteries classified under 871410?
A: No. Batteries should be classified under 8507 (lead-acid batteries, etc.), because Chapter 85 specifically names them. 871410 only covers parts exclusively for motorcycles, but batteries are general electrical components.
Q: Are motorcycle sprockets classified under 871410?
A: Yes, motorcycle sprockets are transmission system parts exclusively used for motorcycles and should be classified under 871410. However, if the sprocket is a general mechanical part, it may be classified under 8483. Determination should be based on whether it is exclusively used for motorcycles.
⚠️ Disclaimer: HS code classification, declaration elements, tariff rates and regulatory conditions on this page are for reference only and do not constitute legal advice on customs classification. Tariff rates and regulations are subject to change; the latest announcements from the General Administration of Customs and on-site determinations shall prevail. Please consult professional customs brokers or customs authorities before import/export.