Chapter 87 covers all land motor vehicles and their parts and accessories other than railway vehicles, including automobiles, motorcycles, bicycles, wheelchairs, etc. This chapter includes not only complete vehicles but also parts and accessories specially or principally for these vehicles, provided that such parts are not more specifically named in other chapters. Motorcycles and their parts are mainly classified under 8711 and 8714. Heading 8714 covers parts and accessories of non-motorized or motorized vehicles such as motorcycles and bicycles, including saddles, frames, forks, brakes, gearboxes, clutches, steering devices, wheels, spokes, fuel tanks, etc. However, certain general-purpose parts (such as bearings, screws) may be classified under other chapters. A fuel tank cap, as a dedicated accessory for motorcycles, is classified under this heading if specially designed for motorcycles. The first 2 digits 87 represent Chapter 87 'Vehicles and their parts and accessories, other than railway or tramway rolling-stock'. The 3rd-4th digits 14 represent heading 8714 'Parts and accessories of motorcycles and bicycles'. The 5th-6th digits 86 are subheading 8714.86, specifically referring to 'Motorcycle fuel tank caps'. Note: under 8714 there are other subheadings such as 8714.1 to 8714.9, but 8714.86 is a subheading newly added in the 2017 version of HS, specifically for motorcycle fuel tank caps, which may previously have been classified under 8714.99 or others. A motorcycle fuel tank cap is a dedicated part of a motorcycle, used to seal the fuel tank and regulate pressure, and belongs to motorcycle accessories. It should not be classified under 8711 (complete motorcycles), nor under 7326 (other articles of iron or steel) or 8481 (valves), etc., because it is a part specially designed for motorcycles and 8714.86 explicitly names it. If it is a general-purpose fuel tank cap (such as for automobiles), it may be classified under 8708 or 8419, etc.

Product Name: The Chinese and foreign language names of the declared commodity should be accurately described as 'Motorcycle fuel tank cap', avoiding general terms. Brand: Fill in the brand or trademark of the fuel tank cap, such as Honda, Yamaha, etc. If there is no brand, indicate 'no brand'. Model: Fill in the model commonly used by the manufacturer or industry, such as 'XXXX-001'. If there is no model, indicate 'no model'. Material: Main material, such as plastic, aluminum alloy, stainless steel, etc. If it is a composite material, indicate the main material. Applicable Vehicle Model: Indicate the applicable motorcycle displacement or model, such as 'suitable for 125cc motorcycles' or 'universal type'. With or Without Lock: Whether the fuel tank cap has a lock, such as 'with lock' or 'without lock', affecting functional determination. Purpose: Briefly describe the purpose, such as 'used for sealing and pressure regulation of motorcycle fuel tanks'. Origin: Country or region of manufacture, such as 'China', 'Japan', etc. Customs declaration example: Product Name: Motorcycle fuel tank cap Brand: Honda Model: 16950-KWB-003 Material: Plastic + aluminum alloy Applicable Vehicle Model: Suitable for 125cc motorcycles With or Without Lock: Without lock Purpose: Used for sealing and pressure regulation of motorcycle fuel tanks Origin: China Quantity: 1000 pieces Unit Price: 2.5 USD Total Price: 2500 USD HS Code: 87148600 Failure to distinguish between motorcycle and automobile fuel tank caps; automobile ones should be classified under 8708, while motorcycle ones under 8714.86. False declaration of material, such as declaring aluminum alloy as plastic, may affect classification and anti-dumping. Ignoring the 'with or without lock' element; a fuel tank cap with a lock may involve lock parts, but if specially designed for motorcycles, it is still classified under 8714.86. Incorrect declaration of brand and model, resulting in inability to match during customs inspection, which may be deemed as false declaration.

Core basis for classification: 1. The commodity must be specially or principally designed for motorcycles (Chapter 87); 2. It belongs to motorcycle parts or accessories (8714); 3. Specifically, it is a fuel tank cap (8714.86). If the fuel tank cap is a general-purpose part (usable for multiple vehicles), it may be classified under other headings. Also, refer to the Explanatory Notes to the Harmonized System for heading 8714; as an accessory to a motorcycle fuel tank, a fuel tank cap meets the description of heading 8714. 871410 Motorcycle saddles: Saddles are motorcycle seats, classified under 8714.10, with a different function from fuel tank caps, but both are motorcycle parts. 871419 Other motorcycle parts: 8714.19 covers other parts besides saddles, fuel tank caps, etc., such as frames, forks, etc. Since fuel tank caps are specifically named, they are not classified here. 870899 Other parts for automobiles: 8708.99 is for automobile parts. If the fuel tank cap is specially designed for automobiles, it is classified here, but for motorcycles it should be under 8714.86. 848180 Valves and similar devices: A fuel tank cap may have a vent valve, but if the whole is specially designed for motorcycles, it is still classified under 8714.86 because 8714.86 specifically names it. 732690 Other articles of iron or steel: If the fuel tank cap is a general-purpose iron or steel article not specially designed for motorcycles, it may be classified under 7326, but motorcycle-specific parts are preferentially classified under 8714. Is it specially designed for motorcycles? Does it fall within the scope of heading 8714? Is it specifically named under 8714.86? Does the material affect classification? Is it confused with automobile parts?

What is the HS code for motorcycle fuel tank caps? The HS code for motorcycle fuel tank caps is 87148600 (the 10-digit code for China Customs is 8714860000). This code belongs to Chapter 87 motor vehicle parts, heading 8714 motorcycle parts, subheading 8714.86 specifically for motorcycle fuel tank caps. How to determine whether a fuel tank cap is for a motorcycle or an automobile? Mainly by the applicable vehicle model and design. Motorcycle fuel tank caps are usually smaller in size, have specific mounting structures, and the brand and model correspond to motorcycles. If it is a universal type that can be used for both automobiles and motorcycles, it should be judged by its principal use; if it cannot be determined, it may be classified under other headings. Does a fuel tank cap with a lock affect the HS code? No. Even with a lock, as long as it is specially designed for motorcycles, it is still classified under 8714.86. The lock itself, if imported separately, may be classified under 8301, but when combined with the fuel tank cap and imported as a whole, it is classified as a motorcycle part. What is the difference between 871486 and 871419? 8714.86 is a specific subheading for motorcycle fuel tank caps, while 8714.19 is a residual subheading for other motorcycle parts. Since 8714.86 specifically names fuel tank caps, they should be preferentially classified under 8714.86 rather than 8714.19. What elements need attention during declaration? It is necessary to declare product name, brand, model, material, applicable vehicle model, with or without lock, purpose, origin, etc. Ensure the declaration elements are complete and accurate, especially the applicable vehicle model and whether it has a lock, to avoid classification disputes. If the fuel tank cap is made of plastic, will the code change? No. HS classification is mainly based on function and use, not material. As long as it is specially designed for motorcycles, whether plastic or metal, it is classified under 8714.86. However, the material must be truthfully declared, as it may affect tariff rates or anti-dumping. What is the export tax rebate for motorcycle fuel tank caps? The export tax rebate rate is subject to national policy adjustments. It is recommended to check the latest export tax rebate rate database or consult the local customs. Typically, the export tax rebate rate for motorcycle parts is 13%, but the official publication shall prevail. Does importing motorcycle fuel tank caps require 3C certification? Motorcycle fuel tank caps are not within the scope of 3C certification, but may need to comply with other technical standards. It is recommended to consult professional institutions or customs before import to confirm whether other certifications are required.