Chapter 87 covers vehicles other than railway or tramway rolling stock, and parts and accessories thereof. This includes motor vehicles (such as cars, trucks, motorcycles), tractors, bicycles, invalid carriages, etc., as well as their dedicated parts. Note, however, that certain parts, if they are general-purpose mechanical parts (such as bearings, gears), may be classified in other chapters. This chapter emphasizes the integrity and specificity of vehicles; parts must be dedicated to or mainly used with vehicles of this chapter. Heading 8714 covers parts and accessories for motorcycles and bicycles. Specifically, it includes: saddles, frames, forks, rims, spokes, hubs, brakes, transmissions, pedals, cranks, chain wheels, chains, silencers, clutches, handlebars, luggage racks, etc. Note, however, that certain electrical parts (such as lights, horns) are classified in Chapter 85, while general fasteners are classified in Chapter 73. This heading is further divided into multiple subheadings by part type and applicable vehicle (motorcycle or bicycle). Code 871481 consists of 6 digits. The first 2 digits '87' represent Chapter 87: Vehicles and parts and accessories thereof, other than railway vehicles. Digits 3-4 '14' represent heading 8714: Parts and accessories for motorcycles and bicycles. Digits 5-6 '81' represent subheading 8714.81: Chain sprocket guards for motorcycles. Note that subheading 8714.81 is specifically for parts designed for motorcycles, while similar parts for bicycles are classified in 8714.9 or other subheadings. A chain sprocket guard is a protective cover installed on the outside of a motorcycle chain sprocket to prevent the chain from falling off or foreign objects from being caught, and is a dedicated accessory for motorcycles. This commodity is a chain sprocket guard for motorcycles, a dedicated part for motorcycles, and is therefore classified in Chapter 87. Since it is a motorcycle part, and the chain sprocket guard is an accessory of the chain sprocket drive system, it is classified under heading 8714 (parts for motorcycles and bicycles). At the subheading level, motorcycle parts and bicycle parts are separated, and chain sprocket guards have a specific listing in the HS classification, so it is classified under 8714.81. It is not classified under 8714.9 (other) or 8714.99, because 8714.81 explicitly includes chain sprocket guards.
Chapter
Chapter 87 covers vehicles other than railway or tramway rolling stock, and parts and accessories thereof. This includes motor vehicles (such as cars, trucks, motorcycles), tractors, bicycles, invalid carriages, etc., as well as their dedicated parts. Note, however, that certain parts, if they are general-purpose mechanical parts (such as bearings, gears), may be classified in other chapters. This chapter emphasizes the integrity and specificity of vehicles; parts must be dedicated to or mainly used with vehicles of this chapter.
Heading
Heading 8714 covers parts and accessories for motorcycles and bicycles. Specifically, it includes: saddles, frames, forks, rims, spokes, hubs, brakes, transmissions, pedals, cranks, chain wheels, chains, silencers, clutches, handlebars, luggage racks, etc. Note, however, that certain electrical parts (such as lights, horns) are classified in Chapter 85, while general fasteners are classified in Chapter 73. This heading is further divided into multiple subheadings by part type and applicable vehicle (motorcycle or bicycle).
Digit Breakdown
Code 871481 consists of 6 digits. The first 2 digits '87' represent Chapter 87: Vehicles and parts and accessories thereof, other than railway vehicles. Digits 3-4 '14' represent heading 8714: Parts and accessories for motorcycles and bicycles. Digits 5-6 '81' represent subheading 8714.81: Chain sprocket guards for motorcycles. Note that subheading 8714.81 is specifically for parts designed for motorcycles, while similar parts for bicycles are classified in 8714.9 or other subheadings. A chain sprocket guard is a protective cover installed on the outside of a motorcycle chain sprocket to prevent the chain from falling off or foreign objects from being caught, and is a dedicated accessory for motorcycles.
Classification Basis
This commodity is a chain sprocket guard for motorcycles, a dedicated part for motorcycles, and is therefore classified in Chapter 87. Since it is a motorcycle part, and the chain sprocket guard is an accessory of the chain sprocket drive system, it is classified under heading 8714 (parts for motorcycles and bicycles). At the subheading level, motorcycle parts and bicycle parts are separated, and chain sprocket guards have a specific listing in the HS classification, so it is classified under 8714.81. It is not classified under 8714.9 (other) or 8714.99, because 8714.81 explicitly includes chain sprocket guards.
📝 Declaration Elements
Product Name: Declare the Chinese and foreign language names of the commodity, and accurately describe the commodity, such as 'Motorcycle chain sprocket guard'. Material: Declare the main material of the commodity, such as plastic, metal (aluminum alloy, steel, etc.). Different materials may affect classification, but here the material does not affect the subheading, and it still must be declared truthfully. Use: Clearly state the use of the commodity, such as 'for protection of motorcycle chain sprocket drive system', and it must be related to motorcycle parts. Brand: Declare the brand of the commodity; if there is no brand, declare it as 'no brand'. The brand helps customs confirm the attributes of the commodity. Model: Declare the model of the commodity; if there is no model, declare it as 'no model'. The model helps distinguish the specific applicable vehicle model. Applicable Vehicle Model: Declare the type or displacement of motorcycle to which the commodity applies, such as 'suitable for 125cc motorcycles', which helps confirm specificity. Is It Universal: Declare whether the commodity can be used universally on other vehicles or machinery, such as 'dedicated for motorcycles, not universal'. Customs declaration example:
Product Name: Motorcycle chain sprocket guard
Material: Aluminum alloy
Use: For protection of motorcycle chain sprocket drive system
Brand: No brand
Model: No model
Applicable Vehicle Model: Suitable for 125cc motorcycles
Is It Universal: Dedicated for motorcycles, not universal
HS Code: 87148100
The declaration elements should be complete, accurate, and consistent with the actual product. Mistakenly classifying motorcycle chain sprocket guards as bicycle parts (8714.9), failing to note the distinction between motorcycles and bicycles. False material declaration, such as declaring plastic as metal, which may affect customs inspection. Unclear use description, failing to indicate 'for motorcycles', leading to classification disputes.
Product Name
Declare the Chinese and foreign language names of the commodity, and accurately describe the commodity, such as 'Motorcycle chain sprocket guard'.
⚠️ Writing only 'guard' or 'chain wheel cover' without indicating it is for motorcycles, leading to classification disputes.
Material
Declare the main material of the commodity, such as plastic, metal (aluminum alloy, steel, etc.). Different materials may affect classification, but here the material does not affect the subheading, and it still must be declared truthfully.
⚠️ The material declaration is not specific, such as writing only 'metal'; the specific type should be indicated.
Use
Clearly state the use of the commodity, such as 'for protection of motorcycle chain sprocket drive system', and it must be related to motorcycle parts.
⚠️ The use description is too broad, such as 'for vehicles', without specifying motorcycles.
Brand
Declare the brand of the commodity; if there is no brand, declare it as 'no brand'. The brand helps customs confirm the attributes of the commodity.
⚠️ Incorrect brand declaration or inconsistency with the actual product.
Model
Declare the model of the commodity; if there is no model, declare it as 'no model'. The model helps distinguish the specific applicable vehicle model.
⚠️ Incomplete model declaration or inconsistency with the actual product.
Applicable Vehicle Model
Declare the type or displacement of motorcycle to which the commodity applies, such as 'suitable for 125cc motorcycles', which helps confirm specificity.
⚠️ Failure to declare the applicable vehicle model, making it impossible to determine whether it is dedicated.
Is It Universal
Declare whether the commodity can be used universally on other vehicles or machinery, such as 'dedicated for motorcycles, not universal'.
⚠️ Declaring a dedicated part as a universal part, leading to classification errors.
Example： Customs declaration example:
Product Name: Motorcycle chain sprocket guard
Material: Aluminum alloy
Use: For protection of motorcycle chain sprocket drive system
Brand: No brand
Model: No model
Applicable Vehicle Model: Suitable for 125cc motorcycles
Is It Universal: Dedicated for motorcycles, not universal
HS Code: 87148100
The declaration elements should be complete, accurate, and consistent with the actual product.
Common Mistakes：
Mistakenly classifying motorcycle chain sprocket guards as bicycle parts (8714.9), failing to note the distinction between motorcycles and bicycles.
False material declaration, such as declaring plastic as metal, which may affect customs inspection.
Unclear use description, failing to indicate 'for motorcycles', leading to classification disputes.
🎯 Classification Logic
Core basis for classification: This commodity is a motorcycle chain sprocket guard, a dedicated part for motorcycles. According to the General Rules for the Interpretation of the HS, first determine whether it belongs to Chapter 87 vehicle parts. Since the chain sprocket guard is a protective device for the motorcycle chain sprocket drive system and is dedicated to motorcycles, it is classified in Chapter 87. At the heading level, motorcycle parts are classified under 8714, and chain sprocket guards have a specific listing under subheading 8714.81. Therefore, when classifying, it is necessary to focus on confirming the specificity, use, and whether the commodity is explicitly described in 8714.81. 871410 Saddles for motorcycles: 871410 is for motorcycle saddles, while 871481 is for chain sprocket guards. Both are motorcycle parts, but the specific part types are different and must not be confused. 871419 Other parts for motorcycles: 871419 is for other motorcycle parts. If a chain sprocket guard were not specifically listed, it might be classified here, but 871481 specifically lists it, so 871481 takes precedence. 871420 Parts for invalid carriages: 871420 is for parts for invalid carriages, which differ from motorcycle parts in use and applicable vehicle. 871491 Chain wheels for bicycles: 871491 is for bicycle chain wheels and parts thereof, while 871481 is for motorcycle chain sprocket guards. The applicable vehicles are different, and the part types are also different. 871499 Other parts for bicycles: 871499 is for other bicycle parts. Mistakenly classifying motorcycle parts here would be incorrect; attention must be paid to the distinction between motorcycles and bicycles. Is the commodity dedicated to motorcycles? Is the commodity a chain sprocket guard? Is it specifically listed in 8714.81? Does the material affect classification? Is it confused with bicycle parts?
Basis
Core basis for classification: This commodity is a motorcycle chain sprocket guard, a dedicated part for motorcycles. According to the General Rules for the Interpretation of the HS, first determine whether it belongs to Chapter 87 vehicle parts. Since the chain sprocket guard is a protective device for the motorcycle chain sprocket drive system and is dedicated to motorcycles, it is classified in Chapter 87. At the heading level, motorcycle parts are classified under 8714, and chain sprocket guards have a specific listing under subheading 8714.81. Therefore, when classifying, it is necessary to focus on confirming the specificity, use, and whether the commodity is explicitly described in 8714.81.
Confused Codes：
871410 - Saddles for motorcycles
871410 is for motorcycle saddles, while 871481 is for chain sprocket guards. Both are motorcycle parts, but the specific part types are different and must not be confused.
871419 - Other parts for motorcycles
871419 is for other motorcycle parts. If a chain sprocket guard were not specifically listed, it might be classified here, but 871481 specifically lists it, so 871481 takes precedence.
871420 - Parts for invalid carriages
871420 is for parts for invalid carriages, which differ from motorcycle parts in use and applicable vehicle.
871491 - Chain wheels for bicycles
871491 is for bicycle chain wheels and parts thereof, while 871481 is for motorcycle chain sprocket guards. The applicable vehicles are different, and the part types are also different.
871499 - Other parts for bicycles
871499 is for other bicycle parts. Mistakenly classifying motorcycle parts here would be incorrect; attention must be paid to the distinction between motorcycles and bicycles.
Self-Check：
✓ Is the commodity dedicated to motorcycles?
✓ Is the commodity a chain sprocket guard?
✓ Is it specifically listed in 8714.81?
✓ Does the material affect classification?
✓ Is it confused with bicycle parts?
❓ FAQ
What is the HS code for motorcycle chain sprocket guards? The HS code for motorcycle chain sprocket guards is 871481, i.e., 8714.81. This code is specifically for motorcycle chain sprocket guards, which are motorcycle parts. When declaring, elements such as product name, material, use, brand, and model must be provided to ensure correct classification. How do you distinguish HS codes for motorcycle parts and bicycle parts? Motorcycle parts and bicycle parts belong to different subheadings in the HS code. Motorcycle parts are generally classified under 8714.1 to 8714.8, while bicycle parts are classified under 8714.9. The key difference is the applicable vehicle: motorcycle parts are dedicated to motorcycles, and bicycle parts are dedicated to bicycles. When declaring, the applicable vehicle model must be specified to avoid confusion. Does the material of the chain sprocket guard affect the HS code? The material of the chain sprocket guard (such as plastic or metal) generally does not affect its HS code, because classification is mainly based on its use and applicable vehicle. However, the material must be declared truthfully for customs inspection. If special materials change the nature of the commodity, classification may be affected, but it is usually still classified under 871481. If the chain sprocket guard is a universal part, can it be classified under 871481? If the chain sprocket guard is a universal part that can be used on multiple vehicles or machinery, it may not be classified under 871481. 871481 requires the commodity to be dedicated to motorcycles. If it is a universal part, it should be classified according to its main use and may be classified under other headings. Therefore, when declaring, it should be clearly stated whether it is dedicated. What are the declaration elements for chain sprocket guards during customs declaration? The declaration elements include: product name, material, use, brand, model, applicable vehicle model, whether it is universal, etc. The specific requirements are subject to customs. It is recommended to provide a detailed description, such as 'Motorcycle chain sprocket guard, made of aluminum alloy, used for 125cc motorcycle chain sprocket protection, no brand, no model, dedicated for motorcycles'. Are chain sprocket guards and chain wheels classified under the same HS code? Chain sprocket guards and chain wheels may be classified under different HS codes. If the chain wheel itself is dedicated to motorcycles, it may be classified under 8714.19 (other motorcycle parts) or a specific listing. Chain sprocket guards, however, have a specific listing under 871481. Therefore, they must be classified separately according to the specific product name and function. How can I check the tariff rate for motorcycle chain sprocket guards? Tariff rates may change. It is recommended to check the latest rates through the official website of the General Administration of Customs, the International Trade Single Window, or a professional customs declaration system. When checking, use the accurate HS code 871481, and note that different countries of origin may apply different rates (such as MFN rates or agreement rates). For cross-border e-commerce sales of motorcycle chain sprocket guards, is the HS code the same? Yes, cross-border e-commerce sales of motorcycle chain sprocket guards also use HS code 871481. However, cross-border e-commerce may be subject to different regulatory methods and tax policies, such as cross-border e-commerce retail import tax. It is recommended to consult a professional customs broker or customs to ensure compliance.
Q: What is the HS code for motorcycle chain sprocket guards?
A: The HS code for motorcycle chain sprocket guards is 871481, i.e., 8714.81. This code is specifically for motorcycle chain sprocket guards, which are motorcycle parts. When declaring, elements such as product name, material, use, brand, and model must be provided to ensure correct classification.
Q: How do you distinguish HS codes for motorcycle parts and bicycle parts?
A: Motorcycle parts and bicycle parts belong to different subheadings in the HS code. Motorcycle parts are generally classified under 8714.1 to 8714.8, while bicycle parts are classified under 8714.9. The key difference is the applicable vehicle: motorcycle parts are dedicated to motorcycles, and bicycle parts are dedicated to bicycles. When declaring, the applicable vehicle model must be specified to avoid confusion.
Q: Does the material of the chain sprocket guard affect the HS code?
A: The material of the chain sprocket guard (such as plastic or metal) generally does not affect its HS code, because classification is mainly based on its use and applicable vehicle. However, the material must be declared truthfully for customs inspection. If special materials change the nature of the commodity, classification may be affected, but it is usually still classified under 871481.
Q: If the chain sprocket guard is a universal part, can it be classified under 871481?
A: If the chain sprocket guard is a universal part that can be used on multiple vehicles or machinery, it may not be classified under 871481. 871481 requires the commodity to be dedicated to motorcycles. If it is a universal part, it should be classified according to its main use and may be classified under other headings. Therefore, when declaring, it should be clearly stated whether it is dedicated.
Q: What are the declaration elements for chain sprocket guards during customs declaration?
A: The declaration elements include: product name, material, use, brand, model, applicable vehicle model, whether it is universal, etc. The specific requirements are subject to customs. It is recommended to provide a detailed description, such as 'Motorcycle chain sprocket guard, made of aluminum alloy, used for 125cc motorcycle chain sprocket protection, no brand, no model, dedicated for motorcycles'.
Q: Are chain sprocket guards and chain wheels classified under the same HS code?
A: Chain sprocket guards and chain wheels may be classified under different HS codes. If the chain wheel itself is dedicated to motorcycles, it may be classified under 8714.19 (other motorcycle parts) or a specific listing. Chain sprocket guards, however, have a specific listing under 871481. Therefore, they must be classified separately according to the specific product name and function.
Q: How can I check the tariff rate for motorcycle chain sprocket guards?
A: Tariff rates may change. It is recommended to check the latest rates through the official website of the General Administration of Customs, the International Trade Single Window, or a professional customs declaration system. When checking, use the accurate HS code 871481, and note that different countries of origin may apply different rates (such as MFN rates or agreement rates).
Q: For cross-border e-commerce sales of motorcycle chain sprocket guards, is the HS code the same?
A: Yes, cross-border e-commerce sales of motorcycle chain sprocket guards also use HS code 871481. However, cross-border e-commerce may be subject to different regulatory methods and tax policies, such as cross-border e-commerce retail import tax. It is recommended to consult a professional customs broker or customs to ensure compliance.
⚠️ Disclaimer: HS code classification, declaration elements, tariff rates and regulatory conditions on this page are for reference only and do not constitute legal advice on customs classification. Tariff rates and regulations are subject to change; the latest announcements from the General Administration of Customs and on-site determinations shall prevail. Please consult professional customs brokers or customs authorities before import/export.