Chapter 87 covers motor vehicles other than railway or tramway rolling stock, and parts and accessories thereof. It includes tractors, passenger vehicles, goods vehicles, special purpose vehicles, motorcycles, bicycles, etc., as well as their dedicated parts. However, note that certain general-purpose parts (such as bolts, nuts, springs), if not clearly intended for motor vehicles, may be classified under other chapters. The core of this chapter is "motor vehicles" and their "dedicated or principally used" parts. Heading 8714 specifically covers parts and accessories of motorcycles (including mopeds) and bicycles (including invalid carriages). It includes frames, forks, hubs, brakes, transmissions, saddles, pedals, chains, engine parts, etc. However, engines themselves are classified under 8407 or 8408, and electrical equipment under 8511, etc. This heading only includes parts dedicated to or principally used with 8711 (motorcycles) and 8712 (bicycles). First 2 digits 87: Chapter 87, motor vehicles and their parts. Digits 3-4: 14: Heading 8714, parts and accessories of motorcycles and bicycles. Digits 5-6: 75: Subheading 871475, specifically "gaskets and gasket-like seals for motorcycles." Note that this is a 6-digit subheading; in the HS code, the first 6 digits are internationally standardized, and subsequent digits are further subdivided by individual countries. 871475 is further limited to gaskets and gasket-like seals for motorcycles, excluding those for bicycles or other uses. Gaskets are typically made of metal, rubber, or composite materials, and are used to prevent leakage of liquids or gases. This product is a gasket and gasket-like seal for motorcycles, belonging to dedicated motorcycle parts, and is therefore classified under Chapter 87. Since it is a part rather than a complete vehicle, it is classified under 8714. Under 8714, it is further subdivided by use and material. Gaskets and gasket-like seals are mainly used in engines, transmissions, and other locations, and are dedicated to motorcycles, so they are classified under 871475. If they are general-purpose gaskets, they may be classified under 8484 (gaskets and similar joints) or 4016 (vulcanized rubber articles), but those dedicated to motorcycles should be classified under this code.

Product Name: The specific name of the declared commodity should be accurately described as "motorcycle gasket" or "motorcycle gasket-like seal," avoiding the generic term "seal." Material: Declare the main material of the gasket and gasket-like seal, such as metal, rubber, asbestos, composite materials, etc. Material affects classification, but under this code, material is not the sole criterion. Use: Clearly indicate use for motorcycles, preferably specifying the specific location, such as engine cylinder gasket, exhaust pipe gasket, transmission gasket, etc. Brand: Declare the brand (such as Honda, Yamaha, etc.); if no brand, fill in "unbranded." Brand helps confirm part applicability. Model: Declare the part model or applicable motorcycle model, such as "suitable for CG125." Model is key to distinguishing dedicated from general-purpose. Specifications and Dimensions: Declare dimensions (such as inner diameter, outer diameter, thickness) or drawing number to facilitate customs confirmation of commodity characteristics. Whether in Set: Declare whether it is packaged as a set or declared individually. A set of gaskets may be classified as a complete set. Origin: Declare the country (region) of origin, which affects tariffs and trade policy. Customs declaration example: Product Name: Motorcycle gasket Material: Stainless steel + graphite composite Use: For motorcycle engine cylinder sealing Brand: Honda Model: Suitable for CG125 Specifications: Inner diameter 50mm, outer diameter 60mm, thickness 2mm Whether in Set: Single piece Origin: China Remarks: Dedicated to motorcycles, not a general-purpose gasket. Not indicating "for motorcycles," writing only "gasket," which may be classified under 8484 or 4016. Material declaration not specific, such as writing only "metal" without specifying the type of metal or composite material. Model or applicable vehicle model not filled in, making it impossible to prove dedication to motorcycles.

Core criteria for classification: First, confirm whether the commodity is dedicated to or principally used with motorcycles (8711). If general-purpose, classify by material (e.g., rubber under 4016, metal under 8484). Second, confirm whether it is a gasket and gasket-like seal, rather than other parts (e.g., oil seals under 8487). Finally, according to HS code 871475, this subheading explicitly includes gaskets and gasket-like seals for motorcycles. Therefore, when declaring, sufficient evidence must be provided to prove dedication to motorcycles, such as applicable vehicle models, part numbers, etc. 848410 Gaskets of metal combined with other materials: 848410 is for general-purpose gaskets, not limited to motorcycles; if not clearly dedicated to motorcycles, classify under this code. 401693 Gaskets of vulcanized rubber: 401693 is for rubber gaskets; if the material is rubber and not dedicated to motorcycles, classify under this code. 871410 Motorcycle brakes and parts thereof: 871410 is for motorcycle brake parts; if the gasket is used in the brake system, it may be classified under this code, but generally gaskets are classified under 871475. 871419 Other parts for motorcycles: 871419 is for other motorcycle parts; if the gasket is not explicitly covered by 871475, it may be classified under this code, but 871475 is more specific. 848790 Other seals for machinery: 848790 is for machinery seals; if the gasket is used in motorcycle engines but not clearly for motorcycles, it may be mistakenly classified under this code. Is it clearly declared as for motorcycles? Is the material specifically described? Is the applicable vehicle model or part number provided? Is it distinguished from general-purpose gaskets? Have adjacent codes been checked?

Are the HS codes for motorcycle gaskets and automobile gaskets the same? No. Automobile gaskets are typically classified under 8708 (parts for motor vehicles), while motorcycle gaskets are classified under 8714. This is because in the HS code, parts for motorcycles (8711) and automobiles (8703, etc.) are classified separately. If the gasket is general-purpose, it may be classified under 8484. How to determine whether a gasket is dedicated to motorcycles? It can be determined by part number, applicable vehicle model, packaging markings, etc. If the supplier provides a part number corresponding to a motorcycle brand, or the packaging indicates motorcycle-specific use, it can be determined. If it is a general-purpose part, it cannot be classified under 871475. If the gasket material is rubber, should it be classified under 4016 or 871475? If the rubber gasket is dedicated to motorcycles, it should be classified under 871475; if it is a general-purpose rubber gasket, it should be classified under 4016. When classifying, priority should be given to dedication rather than material. What is the difference between 871475 and 871419? 871475 is a specific subheading for motorcycle gaskets and gasket-like seals, while 871419 is a subheading for other motorcycle parts. Gaskets should be preferentially classified under 871475, unless the gasket does not fall within the scope of gaskets and gasket-like seals. What are the consequences of forgetting to fill in the applicable vehicle model when declaring? It may result in customs being unable to confirm dedication to motorcycles, thus questioning the classification, and even requiring reclassification under other codes, affecting customs clearance speed and tax rates. It is recommended to always fill in the applicable vehicle model or part number when declaring. What is the import tariff rate for motorcycle gaskets? Tariff rates vary by country, trade agreements, origin, etc., and specific values cannot be given. It is recommended to consult the "Import and Export Tariff" published by the customs administration or obtain the latest rates through the customs classification inquiry system. If the gaskets are in a set, how to declare? If the set of gaskets is dedicated to motorcycles, it is still classified under 871475, but it must be declared as a set and the included components noted. If the set includes other parts, they may need to be classified separately. How to choose the HS code for motorcycle gaskets sold via cross-border e-commerce? Choose 871475, but ensure the commodity is dedicated to motorcycles. If it is a general-purpose part, choose 8484 or 4016. It is recommended to consult a customs broker or use customs classification services to avoid incorrect classification.