Chapter 82 covers tools, implements, cutlery, spoons, forks and parts thereof, of base metal, but excludes machine knives (Chapter 84) and pneumatic or hydraulic hand tools (Chapter 84). This chapter mainly includes hand tools, interchangeable tools, knives, razors, scissors, nail clippers, spoons, forks, etc. The key feature is that these articles are usually made of base metal and are hand-held or manually operated, excluding power-driven tools. Heading 8205 covers various hand tools, including hammers, screwdrivers, pliers, tweezers, scissors, pipe cutters, bolt croppers, punches, pulling tools, etc. These tools are usually used for metalworking, assembly, repair, etc., but exclude tools specially designed for a particular industry (such as shoemaking, hatmaking, etc., which are classified under other headings). Pulling tools under this heading specifically refer to hand tools used for pulling bearings, gears, pins, etc., usually consisting of levers, screws, claws, etc. The first 2 digits 82 represent Chapter 82, namely tools, implements, cutlery, spoons, forks and parts thereof, of base metal. The 3rd-4th digits 05 represent heading 8205, namely hand tools not elsewhere specified or included, including pulling tools. The 5th-6th digits 70 represent subheading 820570, specifically pulling tools. In the HS code, the subheading further subdivides the specific varieties under heading 8205, and pulling tools exist as a separate subheading, distinct from other hand tools such as hammers, screwdrivers, etc. Pulling tools are classified under 820570 because they are hand tools used for pulling operations and are not more specifically named in other subheadings. They differ from other subheadings under 8205 such as 820510 (drilling, threading tools) or 820520 (hammers), and also differ from machine tools of Chapter 84 because they are manually operated. In addition, they do not meet the definitions of other headings in Chapter 82 such as 8201 (agricultural tools) or 8202 (hand saws).
Chapter
Chapter 82 covers tools, implements, cutlery, spoons, forks and parts thereof, of base metal, but excludes machine knives (Chapter 84) and pneumatic or hydraulic hand tools (Chapter 84). This chapter mainly includes hand tools, interchangeable tools, knives, razors, scissors, nail clippers, spoons, forks, etc. The key feature is that these articles are usually made of base metal and are hand-held or manually operated, excluding power-driven tools.
Heading
Heading 8205 covers various hand tools, including hammers, screwdrivers, pliers, tweezers, scissors, pipe cutters, bolt croppers, punches, pulling tools, etc. These tools are usually used for metalworking, assembly, repair, etc., but exclude tools specially designed for a particular industry (such as shoemaking, hatmaking, etc., which are classified under other headings). Pulling tools under this heading specifically refer to hand tools used for pulling bearings, gears, pins, etc., usually consisting of levers, screws, claws, etc.
Digit Breakdown
The first 2 digits 82 represent Chapter 82, namely tools, implements, cutlery, spoons, forks and parts thereof, of base metal. The 3rd-4th digits 05 represent heading 8205, namely hand tools not elsewhere specified or included, including pulling tools. The 5th-6th digits 70 represent subheading 820570, specifically pulling tools. In the HS code, the subheading further subdivides the specific varieties under heading 8205, and pulling tools exist as a separate subheading, distinct from other hand tools such as hammers, screwdrivers, etc.
Classification Basis
Pulling tools are classified under 820570 because they are hand tools used for pulling operations and are not more specifically named in other subheadings. They differ from other subheadings under 8205 such as 820510 (drilling, threading tools) or 820520 (hammers), and also differ from machine tools of Chapter 84 because they are manually operated. In addition, they do not meet the definitions of other headings in Chapter 82 such as 8201 (agricultural tools) or 8202 (hand saws).
📝 Declaration Elements
Product Name: Fill in the Chinese or English name of the commodity, which should be accurately described as a pulling tool, such as 'three-jaw puller', 'bearing puller', etc. Brand: Fill in the manufacturer or brand name; if there is no brand, fill in 'no brand'. Model: Fill in the product model or specification, such as '3 inch', '5 ton', etc., to facilitate customs identification. Material: Fill in the main material of the tool, such as 'carbon steel', 'alloy steel', etc. Use: Fill in the use of the tool, such as 'for removing bearings', 'for pulling gears', etc. Working Principle: Briefly describe the operation method of the tool, such as 'manual screw type', 'hydraulic type', etc. Packaging in Sets: Indicate whether it is packaged in sets, such as 'single piece pack', 'set pack', etc. Product Name: three-jaw pulling tool; Brand: XYZ; Model: 3 inch; Material: alloy steel; Use: for removing bearings; Working Principle: manual screw type; Packaging in Sets: single piece pack. Incorrectly classifying hydraulic pulling tools under 820570, when they should actually be classified under Chapter 8462 or 8467, etc. Confusing pulling tools with machine pulling equipment of Chapter 84, resulting in classification errors. Failure to indicate the working principle at declaration, making it impossible for customs to determine whether it is a hand tool.
Product Name
Fill in the Chinese or English name of the commodity, which should be accurately described as a pulling tool, such as 'three-jaw puller', 'bearing puller', etc.
⚠️ Incorrectly filling in colloquial names such as 'puller' or 'wheel puller', resulting in unclear classification.
Brand
Fill in the manufacturer or brand name; if there is no brand, fill in 'no brand'.
⚠️ Mistaking the distributor for the brand, or omitting the brand, resulting in inaccurate declaration.
Model
Fill in the product model or specification, such as '3 inch', '5 ton', etc., to facilitate customs identification.
⚠️ Incomplete model filling or inconsistency with the actual product.
Material
Fill in the main material of the tool, such as 'carbon steel', 'alloy steel', etc.
⚠️ Filling in only 'metal' is too general; it should be specific to the steel type.
Use
Fill in the use of the tool, such as 'for removing bearings', 'for pulling gears', etc.
⚠️ The use description is too broad, such as 'for maintenance'.
Working Principle
Briefly describe the operation method of the tool, such as 'manual screw type', 'hydraulic type', etc.
⚠️ Mistakenly declaring a hydraulic pulling tool as manual, resulting in classification errors.
Packaging in Sets
Indicate whether it is packaged in sets, such as 'single piece pack', 'set pack', etc.
⚠️ Failure to indicate set tools, affecting the dutiable value.
Example： Product Name: three-jaw pulling tool; Brand: XYZ; Model: 3 inch; Material: alloy steel; Use: for removing bearings; Working Principle: manual screw type; Packaging in Sets: single piece pack.
Common Mistakes：
Incorrectly classifying hydraulic pulling tools under 820570, when they should actually be classified under Chapter 8462 or 8467, etc.
Confusing pulling tools with machine pulling equipment of Chapter 84, resulting in classification errors.
Failure to indicate the working principle at declaration, making it impossible for customs to determine whether it is a hand tool.
🎯 Classification Logic
The core basis for classification is whether the tool is manually operated, whether it is used for pulling, and whether it is a hand tool made of base metal. According to HS notes, 8205 includes manual pulling tools, such as bearing pullers, gear pullers, etc., but excludes power-driven pulling equipment. In addition, if the pulling tool is part of specialized equipment, it may be classified under other headings. 820559 Other hand tools: 820559 covers other hand tools not elsewhere specified, while 820570 is a specifically named subheading for pulling tools, so pulling tools should be classified under 820570 in priority. 846711 Pneumatic pulling tools: 846711 is a pneumatic tool and is power-driven, while 820570 is a hand tool; power-driven tools are not classified under Chapter 82. 846789 Other hydraulic tools: 846789 covers hydraulic pulling tools, etc. If the pulling tool is hydraulically driven, it should be classified under 846789 rather than 820570. 820411 Fixed wrenches: 820411 is a wrench-type tool used for tightening or loosening nuts, while pulling tools are used for pulling, with different functions. Is it a hand tool? Is it used for pulling operations? Is it made of base metal? Is it not more specifically named in other subheadings? Is it non-power-driven?
Basis
The core basis for classification is whether the tool is manually operated, whether it is used for pulling, and whether it is a hand tool made of base metal. According to HS notes, 8205 includes manual pulling tools, such as bearing pullers, gear pullers, etc., but excludes power-driven pulling equipment. In addition, if the pulling tool is part of specialized equipment, it may be classified under other headings.
Confused Codes：
820559 - Other hand tools
820559 covers other hand tools not elsewhere specified, while 820570 is a specifically named subheading for pulling tools, so pulling tools should be classified under 820570 in priority.
846711 - Pneumatic pulling tools
846711 is a pneumatic tool and is power-driven, while 820570 is a hand tool; power-driven tools are not classified under Chapter 82.
846789 - Other hydraulic tools
846789 covers hydraulic pulling tools, etc. If the pulling tool is hydraulically driven, it should be classified under 846789 rather than 820570.
820411 - Fixed wrenches
820411 is a wrench-type tool used for tightening or loosening nuts, while pulling tools are used for pulling, with different functions.
Self-Check：
✓ Is it a hand tool?
✓ Is it used for pulling operations?
✓ Is it made of base metal?
✓ Is it not more specifically named in other subheadings?
✓ Is it non-power-driven?
❓ FAQ
How to check the HS code for pulling tools? First confirm whether the tool is manual or power-driven; manual pulling tools are classified under 820570. Then consult the Import and Export Tariff or customs classification decisions to ensure there is no more specific subheading. Customs advance classification services can also be used. What is the difference between a pulling tool and a puller? Puller is a colloquial term for a pulling tool, usually referring to a manual screw-type puller. When declaring, the standardized name 'pulling tool' should be used to avoid classification disputes caused by using colloquial names. Which code are hydraulic pulling tools classified under? Hydraulic pulling tools are power-driven tools and should be classified under 8467 (hand-held power tools) or 8462 (hydraulic presses), depending on the working principle and use, and not under 820570. What should be noted when declaring pulling tools? It is necessary to indicate the brand, model, material, use, working principle (manual/hydraulic), etc. In particular, the working principle directly affects classification. In addition, set packaging should be indicated for correct valuation. What are the customs supervision conditions for pulling tools? There are usually no special supervision conditions, but general import and export requirements must be met. For details, consult the Customs Supervision Conditions Table; some countries may require quality certification. What are the common errors in classifying pulling tools? Common errors include: classifying hydraulic pulling tools under 820570; confusing pulling tools with wrenches; and failing to indicate the working principle, causing classification disputes. It is recommended to refer to customs classification decisions or consult a professional customs broker. What is the export tax rebate for pulling tools? The export tax rebate rate changes, so the latest Export Tax Rebate Rate Database should be consulted. Generally, hand tools have a relatively high rebate rate, but the specific rate is subject to the customs tariff. It is recommended to use the General Administration of Customs website or consult the tax authorities. How to distinguish pulling tools from disassembly tools? Pulling tools are specifically used for pulling operations, such as removing bearings and gears; disassembly tools may include wrenches, screwdrivers, etc. If the tool is mainly used for pulling, it is classified under 820570; if it is a general disassembly tool, it may be classified under 820559.
Q: How to check the HS code for pulling tools?
A: First confirm whether the tool is manual or power-driven; manual pulling tools are classified under 820570. Then consult the Import and Export Tariff or customs classification decisions to ensure there is no more specific subheading. Customs advance classification services can also be used.
Q: What is the difference between a pulling tool and a puller?
A: Puller is a colloquial term for a pulling tool, usually referring to a manual screw-type puller. When declaring, the standardized name 'pulling tool' should be used to avoid classification disputes caused by using colloquial names.
Q: Which code are hydraulic pulling tools classified under?
A: Hydraulic pulling tools are power-driven tools and should be classified under 8467 (hand-held power tools) or 8462 (hydraulic presses), depending on the working principle and use, and not under 820570.
Q: What should be noted when declaring pulling tools?
A: It is necessary to indicate the brand, model, material, use, working principle (manual/hydraulic), etc. In particular, the working principle directly affects classification. In addition, set packaging should be indicated for correct valuation.
Q: What are the customs supervision conditions for pulling tools?
A: There are usually no special supervision conditions, but general import and export requirements must be met. For details, consult the Customs Supervision Conditions Table; some countries may require quality certification.
Q: What are the common errors in classifying pulling tools?
A: Common errors include: classifying hydraulic pulling tools under 820570; confusing pulling tools with wrenches; and failing to indicate the working principle, causing classification disputes. It is recommended to refer to customs classification decisions or consult a professional customs broker.
Q: What is the export tax rebate for pulling tools?
A: The export tax rebate rate changes, so the latest Export Tax Rebate Rate Database should be consulted. Generally, hand tools have a relatively high rebate rate, but the specific rate is subject to the customs tariff. It is recommended to use the General Administration of Customs website or consult the tax authorities.
Q: How to distinguish pulling tools from disassembly tools?
A: Pulling tools are specifically used for pulling operations, such as removing bearings and gears; disassembly tools may include wrenches, screwdrivers, etc. If the tool is mainly used for pulling, it is classified under 820570; if it is a general disassembly tool, it may be classified under 820559.
⚠️ Disclaimer: HS code classification, declaration elements, tariff rates and regulatory conditions on this page are for reference only and do not constitute legal advice on customs classification. Tariff rates and regulations are subject to change; the latest announcements from the General Administration of Customs and on-site determinations shall prevail. Please consult professional customs brokers or customs authorities before import/export.