Chapter 76 covers aluminum and articles thereof, including unwrought aluminum, aluminum products (bars, rods, profiles, wire, plates, sheets, strip, foil), aluminum tubes, aluminum structures, aluminum containers, aluminum stranded wire, cables, etc. This chapter does not include aluminum ores, aluminum waste and scrap (classified under Chapter 26 or Chapter 85), aluminum tools (Chapter 82), or aluminum machine parts (Chapter 84). Aluminum products are further subdivided by shape, dimensions, and alloy state. Heading 7605 covers aluminum wire (whether or not alloyed), but excludes threaded aluminum wire or aluminum stranded wire, cables, etc. Aluminum wire refers to solid aluminum material of any cross-sectional shape, in coils or spools, with cross-sectional dimensions not exceeding a certain range. Under this heading, subheadings are further divided by alloy vs. non-alloy and maximum cross-sectional dimension. 7605.29 is aluminum alloy wire with a maximum cross-sectional dimension ≤7mm. First 2 digits 76: Chapter 76, Aluminum and articles thereof. Digits 3-4, 05: Heading 7605, Aluminum wire. Digits 5-6, 29: Subheading 7605.29, aluminum alloy wire, with a maximum cross-sectional dimension not exceeding 7 mm. The 5th digit 2 indicates aluminum alloy (1 for non-alloy), and the 6th digit 9 indicates a maximum cross-sectional dimension ≤7mm (1 for >7mm). Note: Subheading 7605.29 applies only to aluminum alloy wire, and the cross-sectional dimension must be ≤7mm. This product is aluminum alloy wire with a maximum cross-sectional dimension ≤7mm, which conforms to the description of 7605.29. If it were non-alloy aluminum wire, it should be classified under 7605.11 (≤7mm) or 7605.19 (>7mm); if it were aluminum alloy wire but with a cross-section >7mm, it would be classified under 7605.21. Therefore, alloy composition and cross-sectional dimension are the key factors distinguishing adjacent codes.
Chapter
Chapter 76 covers aluminum and articles thereof, including unwrought aluminum, aluminum products (bars, rods, profiles, wire, plates, sheets, strip, foil), aluminum tubes, aluminum structures, aluminum containers, aluminum stranded wire, cables, etc. This chapter does not include aluminum ores, aluminum waste and scrap (classified under Chapter 26 or Chapter 85), aluminum tools (Chapter 82), or aluminum machine parts (Chapter 84). Aluminum products are further subdivided by shape, dimensions, and alloy state.
Heading
Heading 7605 covers aluminum wire (whether or not alloyed), but excludes threaded aluminum wire or aluminum stranded wire, cables, etc. Aluminum wire refers to solid aluminum material of any cross-sectional shape, in coils or spools, with cross-sectional dimensions not exceeding a certain range. Under this heading, subheadings are further divided by alloy vs. non-alloy and maximum cross-sectional dimension. 7605.29 is aluminum alloy wire with a maximum cross-sectional dimension ≤7mm.
Digit Breakdown
First 2 digits 76: Chapter 76, Aluminum and articles thereof. Digits 3-4, 05: Heading 7605, Aluminum wire. Digits 5-6, 29: Subheading 7605.29, aluminum alloy wire, with a maximum cross-sectional dimension not exceeding 7 mm. The 5th digit 2 indicates aluminum alloy (1 for non-alloy), and the 6th digit 9 indicates a maximum cross-sectional dimension ≤7mm (1 for >7mm). Note: Subheading 7605.29 applies only to aluminum alloy wire, and the cross-sectional dimension must be ≤7mm.
Classification Basis
This product is aluminum alloy wire with a maximum cross-sectional dimension ≤7mm, which conforms to the description of 7605.29. If it were non-alloy aluminum wire, it should be classified under 7605.11 (≤7mm) or 7605.19 (>7mm); if it were aluminum alloy wire but with a cross-section >7mm, it would be classified under 7605.21. Therefore, alloy composition and cross-sectional dimension are the key factors distinguishing adjacent codes.
📝 Declaration Elements
Product Name: Declare the commodity name, which should be specifically "aluminum alloy wire", avoiding the generic term "aluminum wire". Material: Specify the specific grade or composition of the aluminum alloy, such as 6061, 6063, etc., and indicate that it is an aluminum alloy. Cross-sectional Dimension: Declare the maximum cross-sectional dimension in millimeters, which must be ≤7mm. Shape: Describe as wire-like, in coils or spools, solid cross-section. State: Indicate whether it has undergone surface treatment, coating, annealing, etc. Use: Declare the main use, such as welding, weaving, conductor, etc. Brand: If there is a brand, declare the brand name; if no brand, declare "none". Model: Declare the product model or specification. Product Name: Aluminum alloy wire; Material: Aluminum alloy 6061; Cross-sectional Dimension: 5mm; Shape: Wire-like, in coils; State: Bright surface, uncoated; Use: For weaving mesh; Brand: None; Model: AL-6061-5. Failure to indicate the alloy grade, making it impossible to determine whether it is aluminum alloy. Incorrect declaration of cross-sectional dimension, such as mistakenly reporting a diameter of 5mm as 5mm². Mistakenly declaring non-alloy aluminum wire as aluminum alloy wire, leading to classification errors.
Product Name
Declare the commodity name, which should be specifically "aluminum alloy wire", avoiding the generic term "aluminum wire".
⚠️ Incorrectly declared as "aluminum wire" or "aluminum cable", without indicating alloy.
Material
Specify the specific grade or composition of the aluminum alloy, such as 6061, 6063, etc., and indicate that it is an aluminum alloy.
⚠️ Only writing "aluminum" or "aluminum alloy", without providing the grade.
Cross-sectional Dimension
Declare the maximum cross-sectional dimension in millimeters, which must be ≤7mm.
⚠️ Failing to provide the dimension or mistakenly reporting it as diameter, leading to classification errors.
Shape
Describe as wire-like, in coils or spools, solid cross-section.
⚠️ Incorrectly describing as "bar" or "rod".
State
Indicate whether it has undergone surface treatment, coating, annealing, etc.
⚠️ Omitting state information, affecting classification.
Use
Declare the main use, such as welding, weaving, conductor, etc.
⚠️ Use description is too broad.
Brand
If there is a brand, declare the brand name; if no brand, declare "none".
Failure to indicate the alloy grade, making it impossible to determine whether it is aluminum alloy.
Incorrect declaration of cross-sectional dimension, such as mistakenly reporting a diameter of 5mm as 5mm².
Mistakenly declaring non-alloy aluminum wire as aluminum alloy wire, leading to classification errors.
🎯 Classification Logic
The core basis for classification is: 1) whether the material is aluminum alloy; 2) whether the maximum cross-sectional dimension is ≤7mm; 3) whether the shape is wire-like. According to HS notes, aluminum wire refers to solid aluminum material of any cross-sectional shape, in coils or spools, with cross-sectional dimensions not exceeding a certain range. Subheading 7605.29 specifically covers aluminum alloy wire with a cross-section ≤7mm. 7605.11 Non-alloy aluminum wire, maximum cross-sectional dimension ≤7mm: Material is non-alloy aluminum, whereas 7605.29 is aluminum alloy. 7605.21 Aluminum alloy wire, maximum cross-sectional dimension >7mm: Cross-sectional dimension >7mm, whereas 7605.29 is ≤7mm. 7605.19 Non-alloy aluminum wire, maximum cross-sectional dimension >7mm: Material is non-alloy and dimension >7mm. 7604.29 Aluminum alloy bars, rods, profiles: Shape is bar, rod, profile, not wire-like. 7614.90 Aluminum stranded wire, cables, etc.: It is stranded wire or cable, not a single solid wire. Is the material aluminum alloy? Is the maximum cross-sectional dimension ≤7mm? Is the shape wire-like? Is it in coils or spools? Are stranded wires and cables excluded?
Basis
The core basis for classification is: 1) whether the material is aluminum alloy; 2) whether the maximum cross-sectional dimension is ≤7mm; 3) whether the shape is wire-like. According to HS notes, aluminum wire refers to solid aluminum material of any cross-sectional shape, in coils or spools, with cross-sectional dimensions not exceeding a certain range. Subheading 7605.29 specifically covers aluminum alloy wire with a cross-section ≤7mm.
Confused Codes：
7605.11 - Non-alloy aluminum wire, maximum cross-sectional dimension ≤7mm
Material is non-alloy aluminum, whereas 7605.29 is aluminum alloy.
7605.21 - Aluminum alloy wire, maximum cross-sectional dimension >7mm
Cross-sectional dimension >7mm, whereas 7605.29 is ≤7mm.
7605.19 - Non-alloy aluminum wire, maximum cross-sectional dimension >7mm
Material is non-alloy and dimension >7mm.
7604.29 - Aluminum alloy bars, rods, profiles
Shape is bar, rod, profile, not wire-like.
7614.90 - Aluminum stranded wire, cables, etc.
It is stranded wire or cable, not a single solid wire.
Self-Check：
✓ Is the material aluminum alloy?
✓ Is the maximum cross-sectional dimension ≤7mm?
✓ Is the shape wire-like?
✓ Is it in coils or spools?
✓ Are stranded wires and cables excluded?
❓ FAQ
How to inquire about the tax rate for HS code 760529? The latest tax rate can be obtained through the official website of the General Administration of Customs, China International Trade Single Window, or by consulting the "Import and Export Tariff of the People's Republic of China". Note that tax rates are subject to policy adjustments, and it is recommended to refer to the latest official announcements. What is the difference between aluminum alloy wire and aluminum wire when declaring? Aluminum alloy wire must indicate the alloy grade and is classified under 7605.29; non-alloy aluminum wire is classified under 7605.11 or 7605.19. When declaring, be sure to provide material composition to avoid classification errors. How is the maximum cross-sectional dimension measured? For round wire, measure the diameter; for shaped wire, measure the maximum cross-sectional dimension. Use precision measuring tools to ensure accuracy. Dimensions ≤7mm are classified under 7605.29, and >7mm under 7605.21. If aluminum alloy wire is coated, does it affect classification? Generally, it does not affect classification and remains under 7605.29. However, if the coating makes it another product (such as insulated wire), it may be classified under 8544. Judgment should be based on the nature of the coating and the use. How should aluminum alloy wire used for welding be declared? It is still classified under 7605.29, but the use column should indicate "for welding", and elements such as material and dimensions should be declared. If it is a welding electrode, it may be classified under 8311. What regulatory documents are required for importing aluminum alloy wire? Usually no special regulatory documents are required, but it must comply with national technical specifications. It is recommended to check the latest announcements from the General Administration of Customs to confirm whether anti-dumping, countervailing, or other trade measures are involved. What is the difference between 760529 and 760521? Both are aluminum alloy wire, and the difference lies in the maximum cross-sectional dimension: 760529 is ≤7mm, and 760521 is >7mm. When declaring, accurate measurement and dimension indication are required. How to declare aluminum alloy wire for cross-border e-commerce retail? It should be declared as a cross-border e-commerce retail export commodity, providing HS code, product name, material, dimensions, etc. Note the personal item limit; if exceeded, it must be declared as general trade.
Q: How to inquire about the tax rate for HS code 760529?
A: The latest tax rate can be obtained through the official website of the General Administration of Customs, China International Trade Single Window, or by consulting the "Import and Export Tariff of the People's Republic of China". Note that tax rates are subject to policy adjustments, and it is recommended to refer to the latest official announcements.
Q: What is the difference between aluminum alloy wire and aluminum wire when declaring?
A: Aluminum alloy wire must indicate the alloy grade and is classified under 7605.29; non-alloy aluminum wire is classified under 7605.11 or 7605.19. When declaring, be sure to provide material composition to avoid classification errors.
Q: How is the maximum cross-sectional dimension measured?
A: For round wire, measure the diameter; for shaped wire, measure the maximum cross-sectional dimension. Use precision measuring tools to ensure accuracy. Dimensions ≤7mm are classified under 7605.29, and >7mm under 7605.21.
Q: If aluminum alloy wire is coated, does it affect classification?
A: Generally, it does not affect classification and remains under 7605.29. However, if the coating makes it another product (such as insulated wire), it may be classified under 8544. Judgment should be based on the nature of the coating and the use.
Q: How should aluminum alloy wire used for welding be declared?
A: It is still classified under 7605.29, but the use column should indicate "for welding", and elements such as material and dimensions should be declared. If it is a welding electrode, it may be classified under 8311.
Q: What regulatory documents are required for importing aluminum alloy wire?
A: Usually no special regulatory documents are required, but it must comply with national technical specifications. It is recommended to check the latest announcements from the General Administration of Customs to confirm whether anti-dumping, countervailing, or other trade measures are involved.
Q: What is the difference between 760529 and 760521?
A: Both are aluminum alloy wire, and the difference lies in the maximum cross-sectional dimension: 760529 is ≤7mm, and 760521 is >7mm. When declaring, accurate measurement and dimension indication are required.
Q: How to declare aluminum alloy wire for cross-border e-commerce retail?
A: It should be declared as a cross-border e-commerce retail export commodity, providing HS code, product name, material, dimensions, etc. Note the personal item limit; if exceeded, it must be declared as general trade.
⚠️ Disclaimer: HS code classification, declaration elements, tariff rates and regulatory conditions on this page are for reference only and do not constitute legal advice on customs classification. Tariff rates and regulations are subject to change; the latest announcements from the General Administration of Customs and on-site determinations shall prevail. Please consult professional customs brokers or customs authorities before import/export.