Chapter 72 covers iron and steel and articles thereof, including pig iron, ferroalloys, direct reduced iron, waste and scrap, ingots and other primary forms, as well as semi-finished products, flat-rolled products, bars and rods, profiles, wire, etc. This chapter is the most important chapter for metal materials in international trade, involving a large number of industrial raw materials. Classification requires attention to material composition, processing state, and cross-sectional shape. Heading 7226 covers flat-rolled products of other alloy steel, including cold-rolled or hot-rolled products of a width less than 600mm, but excluding further worked or specifically coated products. This heading is subdivided into subheadings based on different widths, processing states, and compositions. 722619 specifically refers to cold-rolled alloy steel strip, not clad, plated or coated. First 2 digits 72 = Chapter on iron and steel; digits 3-4: 26 = flat-rolled products of other alloy steel, width <600mm; digits 5-6: 19 = cold-rolled (cold-reduced), not clad, plated or coated. Note: the 5th digit 1 indicates cold-rolled, the 6th digit 9 indicates other not elsewhere specified. The actual subheading 722619 corresponds to cold-rolled alloy steel strip, which must be distinguished from other cold-rolled alloy steel flat-rolled products. This commodity is cold-rolled alloy steel strip, width less than 600mm, not plated or coated, conforming to the characteristics of the cold-rolled subheading under heading 7226. If width ≥600mm, it should be classified under 7225; if plated or coated, under 7227 or 7228; if stainless steel, under 7220.

Product Name: Standard name of the declared commodity, which should include material, processing state, and shape, such as 'cold-rolled alloy steel strip'. Material Composition: Indicate major alloying elements and their content, such as chromium, nickel, molybdenum, etc., to determine whether it is alloy steel. Processing State: State cold-rolled, hot-rolled, annealed, etc. This code requires cold-rolled. Width: Accurate to the millimeter. This code requires width less than 600mm. Thickness: Accurate to the millimeter, affecting classification and duty rate. Surface Treatment: Whether plated, coated, or clad. This code requires not clad, plated or coated. Use: Briefly describe the main use, such as manufacturing cutting tools, springs, etc. Product name: Cold-rolled alloy steel strip; Material: Alloy steel, containing 1.5% chromium, 0.5% molybdenum; Processing state: Cold-rolled; Width: 300mm; Thickness: 1.2mm; Surface treatment: Not plated, not coated; Use: Manufacturing mechanical parts. Failing to provide alloying element content, unable to prove it is alloy steel. Mistakenly classifying alloy steel strip with width ≥600mm under this code. Ignoring surface treatment, incorrectly declaring plated products.

Classification basis: 1) Material is alloy steel (not stainless steel, containing alloying elements in accordance with Chapter 72 notes); 2) Flat-rolled product, width <600mm; 3) Cold-rolled and not clad, plated or coated; 4) Excluding further worked or specific use. Must be combined with the Tariff and notes. 7225 Flat-rolled products of other alloy steel, width ≥600mm: Different width. 7225 is width ≥600mm, this code is <600mm. 7220 Flat-rolled products of stainless steel: Different material. 7220 is stainless steel, this code is other alloy steel. 7227 Bars and rods of other alloy steel: Different shape. 7227 is bars and rods, this code is flat-rolled products. 7228 Profiles of other alloy steel: Different cross-sectional shape. 7228 is profiles, this code is flat-rolled products. Is it alloy steel? Is width <600mm? Is it cold-rolled? Is it not plated or coated? Is it a flat-rolled product?

How do I determine if my steel strip is alloy steel? According to Chapter 72 notes, alloy steel must contain a certain amount of alloying elements, such as aluminum, chromium, cobalt, copper, manganese, molybdenum, nickel, silicon, titanium, tungsten, vanadium, etc., and the content must meet the specified requirements. It is recommended to provide a material report and determine based on the alloying element content by weight. What is the difference in classification between cold-rolled and hot-rolled? Cold-rolled and hot-rolled affect subheading division. Under heading 7226, cold-rolled is classified under 72261, hot-rolled under 72262, etc. This code 722619 specifically refers to cold-rolled; hot-rolled should be classified under 722620, etc. How to classify if the width is exactly 600mm? Alloy steel flat-rolled products with width ≥600mm are classified under 7225; less than 600mm under 7226. 600mm is the dividing point and must be accurately measured. Where does galvanized alloy steel strip go? Galvanizing is a plating, and should be classified under 7227 or 7228 and corresponding subheadings, not 722619. 722619 requires not clad, plated or coated. What is the export tax rebate for this code? Export tax rebate rates are subject to adjustment. Please consult the latest 'Export Tax Rebate Rate Database' or consult customs. Generally, alloy steel strip has a rebate, but the actual rate shall prevail. Is a material certificate required for declaration? It is recommended, especially for alloy steel, as customs may require laboratory testing. A material certificate can avoid classification disputes. If the steel strip undergoes further processing, such as cutting, can it still be classified under this code? If only simple processing such as cutting or stamping, it may still be classified under this code. If processed into specific articles, it may be classified under other chapters. How to check the regulatory conditions for this code? Check regulatory conditions through the General Administration of Customs website or the Tariff, such as whether a license, commodity inspection, etc. is required.