Chapter 76 covers aluminum and articles thereof, including unwrought aluminum, aluminum products, etc. This chapter is divided into three parts: 7601 unwrought aluminum, 7602 aluminum waste and scrap, 7603-7616 various aluminum products. Aluminum products are lightweight, corrosion-resistant, and have good thermal and electrical conductivity, widely used in packaging, construction, transportation, electronics, and other fields. The aluminum products in this chapter include tubes, plates, strips, foil, wire, structural parts, containers, tableware, etc. Heading 7613 specifically covers containers of aluminum for the transport or storage of compressed or liquefied gases. Such containers typically withstand high pressure and are used in industries, medical care, firefighting, etc., such as oxygen cylinders, acetylene cylinders, liquefied petroleum gas steel cylinders, etc. The material must be aluminum or aluminum alloy, and the use is limited to the transport or storage of compressed or liquefied gases. It does not include ordinary aluminum containers (such as barrels, cans) or containers for non-gas uses. Code 761300 is a 6-digit subheading. The first 2 digits 76 indicate Chapter 76 aluminum and articles thereof; the 3rd-4th digits 13 indicate heading 7613, i.e., containers of aluminum for the transport or storage of compressed or liquefied gases; the 5th-6th digits 00 indicate that there is no further subdivision under this heading, and all aluminum gas containers meeting the description are classified under this subheading. Therefore, 761300 fully represents aluminum containers for compressed or liquefied gases. This commodity is classified under 7613 rather than other aluminum product headings because it is specifically used for the transport or storage of compressed or liquefied gases and has pressure-bearing characteristics. It differs from 7612 (aluminum barrels, cans, etc.) in use and pressure-bearing capacity; it is clearly different from 7615 (aluminum tableware, etc.). In addition, if made of steel, it is classified under 7311; if made of aluminum, it is classified under 7613.
Chapter
Chapter 76 covers aluminum and articles thereof, including unwrought aluminum, aluminum products, etc. This chapter is divided into three parts: 7601 unwrought aluminum, 7602 aluminum waste and scrap, 7603-7616 various aluminum products. Aluminum products are lightweight, corrosion-resistant, and have good thermal and electrical conductivity, widely used in packaging, construction, transportation, electronics, and other fields. The aluminum products in this chapter include tubes, plates, strips, foil, wire, structural parts, containers, tableware, etc.
Heading
Heading 7613 specifically covers containers of aluminum for the transport or storage of compressed or liquefied gases. Such containers typically withstand high pressure and are used in industries, medical care, firefighting, etc., such as oxygen cylinders, acetylene cylinders, liquefied petroleum gas steel cylinders, etc. The material must be aluminum or aluminum alloy, and the use is limited to the transport or storage of compressed or liquefied gases. It does not include ordinary aluminum containers (such as barrels, cans) or containers for non-gas uses.
Digit Breakdown
Code 761300 is a 6-digit subheading. The first 2 digits 76 indicate Chapter 76 aluminum and articles thereof; the 3rd-4th digits 13 indicate heading 7613, i.e., containers of aluminum for the transport or storage of compressed or liquefied gases; the 5th-6th digits 00 indicate that there is no further subdivision under this heading, and all aluminum gas containers meeting the description are classified under this subheading. Therefore, 761300 fully represents aluminum containers for compressed or liquefied gases.
Classification Basis
This commodity is classified under 7613 rather than other aluminum product headings because it is specifically used for the transport or storage of compressed or liquefied gases and has pressure-bearing characteristics. It differs from 7612 (aluminum barrels, cans, etc.) in use and pressure-bearing capacity; it is clearly different from 7615 (aluminum tableware, etc.). In addition, if made of steel, it is classified under 7311; if made of aluminum, it is classified under 7613.
📝 Declaration Elements
Product Name: The specific name of the declared commodity, such as "aluminum alloy seamless gas cylinder", "aluminum liquefied petroleum gas cylinder", etc., must be consistent with the actual product. Material: Indicate the specific grade of aluminum or aluminum alloy, such as 6061 aluminum alloy, to ensure compliance with aluminum requirements. Use: Clearly state that it is used for the transport or storage of compressed or liquefied gases, such as "storing oxygen", "transporting liquefied petroleum gas". Working Pressure: Declare the design pressure or working pressure of the container, such as "15MPa", to reflect the pressure-bearing characteristics. Volume: Declare the volume of the container, such as "40L", which affects classification and regulatory conditions. Brand: Declare the brand name; if no brand, fill in "no brand". Model: Declare the product model, such as "WMA-40L". Product Name: Aluminum alloy seamless gas cylinder; Material: 6061 aluminum alloy; Use: Storing compressed oxygen; Working Pressure: 15MPa; Volume: 40L; Brand: No brand; Model: WMA-40L. Mistakenly classifying aluminum gas cylinders under 7612 (aluminum barrels and cans), ignoring their pressure-bearing and gas use. Declaring the material as "steel" or "iron", leading to incorrect classification under 7311. Describing the use as "storing liquid" instead of "compressed or liquefied gas", causing classification disputes.
Product Name
The specific name of the declared commodity, such as "aluminum alloy seamless gas cylinder", "aluminum liquefied petroleum gas cylinder", etc., must be consistent with the actual product.
⚠️ Writing only "aluminum cylinder" is too general and does not reflect the gas use.
Material
Indicate the specific grade of aluminum or aluminum alloy, such as 6061 aluminum alloy, to ensure compliance with aluminum requirements.
⚠️ Mistakenly writing "steel" or not indicating the alloy composition.
Use
Clearly state that it is used for the transport or storage of compressed or liquefied gases, such as "storing oxygen", "transporting liquefied petroleum gas".
⚠️ Writing "storing liquid" or "general container", leading to classification errors.
Working Pressure
Declare the design pressure or working pressure of the container, such as "15MPa", to reflect the pressure-bearing characteristics.
⚠️ Not providing pressure parameters, unable to prove it is a pressure-bearing container.
Volume
Declare the volume of the container, such as "40L", which affects classification and regulatory conditions.
⚠️ Not providing volume, or incorrect unit (e.g., writing "40 kg").
Brand
Declare the brand name; if no brand, fill in "no brand".
⚠️ Brand does not match the actual product or is omitted.
Model
Declare the product model, such as "WMA-40L".
⚠️ Model omitted or does not match the actual product.
Example： Product Name: Aluminum alloy seamless gas cylinder; Material: 6061 aluminum alloy; Use: Storing compressed oxygen; Working Pressure: 15MPa; Volume: 40L; Brand: No brand; Model: WMA-40L.
Common Mistakes：
Mistakenly classifying aluminum gas cylinders under 7612 (aluminum barrels and cans), ignoring their pressure-bearing and gas use.
Declaring the material as "steel" or "iron", leading to incorrect classification under 7311.
Describing the use as "storing liquid" instead of "compressed or liquefied gas", causing classification disputes.
🎯 Classification Logic
The core basis for classification is: 1) The material is aluminum or aluminum alloy; 2) The use is for the transport or storage of compressed or liquefied gases; 3) It has pressure-bearing capacity. All three conditions must be met simultaneously. If the material is steel, it is classified under 7311; if it is aluminum but not for gas use, it is classified under 7612 or 7615, etc. 731100 Containers of iron or steel for compressed or liquefied gas: The material is iron or steel, while 761300 is aluminum. The core difference is the material; aluminum is lighter but more expensive. 761210 Aluminum barrels, cans, and similar containers: 761210 is ordinary aluminum containers, not pressure-bearing, not for gas; 761300 is specifically for gas and pressure-bearing. 761290 Other aluminum containers: 761290 is other aluminum containers, such as boxes, cases, etc., not for gas; 761300 is specifically for gas. 761519 Other aluminum tableware, kitchenware: 761519 is aluminum tableware, etc., completely different in use from gas containers. Is the material aluminum or aluminum alloy? Is the use for the transport or storage of compressed or liquefied gases? Does it have pressure-bearing capacity (e.g., working pressure)? Is it excluding containers made of iron or steel? Is it excluding aluminum containers for non-gas uses?
Basis
The core basis for classification is: 1) The material is aluminum or aluminum alloy; 2) The use is for the transport or storage of compressed or liquefied gases; 3) It has pressure-bearing capacity. All three conditions must be met simultaneously. If the material is steel, it is classified under 7311; if it is aluminum but not for gas use, it is classified under 7612 or 7615, etc.
Confused Codes：
731100 - Containers of iron or steel for compressed or liquefied gas
The material is iron or steel, while 761300 is aluminum. The core difference is the material; aluminum is lighter but more expensive.
761210 - Aluminum barrels, cans, and similar containers
761210 is ordinary aluminum containers, not pressure-bearing, not for gas; 761300 is specifically for gas and pressure-bearing.
761290 - Other aluminum containers
761290 is other aluminum containers, such as boxes, cases, etc., not for gas; 761300 is specifically for gas.
761519 - Other aluminum tableware, kitchenware
761519 is aluminum tableware, etc., completely different in use from gas containers.
Self-Check：
✓ Is the material aluminum or aluminum alloy?
✓ Is the use for the transport or storage of compressed or liquefied gases?
✓ Does it have pressure-bearing capacity (e.g., working pressure)?
✓ Is it excluding containers made of iron or steel?
✓ Is it excluding aluminum containers for non-gas uses?
❓ FAQ
What is the difference in HS codes between aluminum gas cylinders and steel gas cylinders? Aluminum gas cylinders are classified under 761300, and steel gas cylinders under 731100. The difference lies in the material; aluminum is lighter and more corrosion-resistant, while steel has high strength and low cost. Accurate material certification is required for declaration. Are working pressure and volume mandatory declaration elements for aluminum gas cylinders? Yes, working pressure and volume are key parameters to prove that they are pressure-bearing gas containers. Missing them may lead to classification errors or failure to pass inspection. It is recommended to clearly fill them in the customs declaration form. If an aluminum container is used to store liquid instead of gas, which code should it be classified under? If used to store liquid, it is not classified under 761300. It should be classified under 7612 (aluminum barrels and cans) or 7615 (aluminum tableware, etc.) according to the specific use and shape. Attention should be paid to the description of use. How to inquire about the import tariff rate for 761300? The latest tariff rate can be inquired through the official website of the General Administration of Customs of China or the International Trade Single Window. Tariff rates may change due to country, trade agreements, etc. It is recommended to rely on official real-time data. What regulatory conditions are required for the export of aluminum gas cylinders? Usually, they need to comply with the pressure vessel safety standards of the exporting country, and may require quality certification, commodity inspection certificates, etc. Specific regulatory conditions vary by destination country. It is recommended to consult a professional customs broker. Does 761300 include aluminum liquefied natural gas (LNG) tanks? Yes, aluminum LNG tanks are used to store liquefied natural gas and belong to compressed or liquefied gas containers, so they should be classified under 761300. However, note that large fixed storage tanks may be classified under other codes. If an aluminum gas cylinder is equipped with valves and pressure reducing valves, does the classification change? It is usually still classified under 761300 because valves and other accessories are components of the gas cylinder. However, if the valves are declared separately, they should be classified under valve codes. When declared as a whole, the gas cylinder is the main item. How to declare small aluminum gas cylinders sold via cross-border e-commerce? They should be declared under 761300, providing elements such as material, use, pressure, and volume. Note that personal mailed items may have value limits and must comply with air transport safety regulations.
Q: What is the difference in HS codes between aluminum gas cylinders and steel gas cylinders?
A: Aluminum gas cylinders are classified under 761300, and steel gas cylinders under 731100. The difference lies in the material; aluminum is lighter and more corrosion-resistant, while steel has high strength and low cost. Accurate material certification is required for declaration.
Q: Are working pressure and volume mandatory declaration elements for aluminum gas cylinders?
A: Yes, working pressure and volume are key parameters to prove that they are pressure-bearing gas containers. Missing them may lead to classification errors or failure to pass inspection. It is recommended to clearly fill them in the customs declaration form.
Q: If an aluminum container is used to store liquid instead of gas, which code should it be classified under?
A: If used to store liquid, it is not classified under 761300. It should be classified under 7612 (aluminum barrels and cans) or 7615 (aluminum tableware, etc.) according to the specific use and shape. Attention should be paid to the description of use.
Q: How to inquire about the import tariff rate for 761300?
A: The latest tariff rate can be inquired through the official website of the General Administration of Customs of China or the International Trade Single Window. Tariff rates may change due to country, trade agreements, etc. It is recommended to rely on official real-time data.
Q: What regulatory conditions are required for the export of aluminum gas cylinders?
A: Usually, they need to comply with the pressure vessel safety standards of the exporting country, and may require quality certification, commodity inspection certificates, etc. Specific regulatory conditions vary by destination country. It is recommended to consult a professional customs broker.
Q: Does 761300 include aluminum liquefied natural gas (LNG) tanks?
A: Yes, aluminum LNG tanks are used to store liquefied natural gas and belong to compressed or liquefied gas containers, so they should be classified under 761300. However, note that large fixed storage tanks may be classified under other codes.
Q: If an aluminum gas cylinder is equipped with valves and pressure reducing valves, does the classification change?
A: It is usually still classified under 761300 because valves and other accessories are components of the gas cylinder. However, if the valves are declared separately, they should be classified under valve codes. When declared as a whole, the gas cylinder is the main item.
Q: How to declare small aluminum gas cylinders sold via cross-border e-commerce?
A: They should be declared under 761300, providing elements such as material, use, pressure, and volume. Note that personal mailed items may have value limits and must comply with air transport safety regulations.
⚠️ Disclaimer: HS code classification, declaration elements, tariff rates and regulatory conditions on this page are for reference only and do not constitute legal advice on customs classification. Tariff rates and regulations are subject to change; the latest announcements from the General Administration of Customs and on-site determinations shall prevail. Please consult professional customs brokers or customs authorities before import/export.