Chapter 76 covers aluminum and articles thereof, including unwrought aluminum, aluminum powders, aluminum wire, aluminum plates, aluminum foil, aluminum tubes, etc. This chapter is an important component of base metals and articles thereof in the HS classification. Aluminum, as a light metal, has a huge trade volume. Within the chapter, hierarchical classification is based on the degree of processing (unwrought, wrought, further articles) and alloy type (non-alloyed, alloyed). Heading 7605 specifically refers to aluminum wire, distinguishing it from aluminum bars, profiles, etc. Heading 7605 covers aluminum wire, whether or not alloyed, but excludes stranded wire, cables, plaited bands and the like of aluminum (classified under 7614). Aluminum wire refers to solid cross-section products produced by drawing or extrusion, usually in coils, used for further processing such as cables, welding wire, rivets, etc. Under this heading, it is subdivided by alloy type (non-alloyed, alloyed) and maximum cross-sectional dimension. First 2 digits 76: Chapter 76, Aluminum and articles thereof. Digits 3-4: 05: Heading 7605, aluminum wire. Digits 5-6: 19: Subheading 760519, wire of non-alloyed aluminum, with a maximum cross-sectional dimension not exceeding 7 mm. Specifically, 7605 is divided into: 760511 (wire of non-alloyed aluminum, max cross-sectional dimension >7mm), 760519 (wire of non-alloyed aluminum, ≤7mm), 760521 (wire of aluminum alloys, >7mm), 760529 (wire of aluminum alloys, ≤7mm). Therefore, 760519 precisely points to non-alloyed aluminum wire of small dimensions. This commodity is non-alloyed aluminum wire with a maximum cross-sectional dimension not exceeding 7 mm, therefore classified under 760519. If the dimension exceeds 7 mm, it should be classified under 760511; if it is aluminum alloy wire, it should be classified under 760521 or 760529. In addition, attention should be paid to the difference between aluminum wire and aluminum bars, rods: aluminum bars and rods usually refer to straight, non-coiled products, classified under 7604; aluminum wire is usually coiled, classified under 7605.

Product Name: Declare the commodity name, which should be described in detail as "non-alloyed aluminum wire", avoiding the generic term "aluminum wire". Material: Specify the purity or grade of aluminum, such as 1060, 1100, etc. Non-alloyed aluminum refers to aluminum content ≥99.5%. Maximum Cross-Sectional Dimension: Accurately measure and declare the maximum cross-sectional dimension in millimeters, ensuring ≤7mm. Condition: Such as whether in coils, whether annealed, surface treatment, etc. Use: Such as for cables, welding wire, rivets, etc., helping to confirm classification. Brand: If there is a brand, declare it; if no brand, fill in "none". Model: Specific model or specification, such as diameter, length, etc. Origin: Country of production, affecting tariffs and trade policies. Product Name: Non-alloyed aluminum wire; Material: Aluminum content 99.6%, grade 1060; Maximum Cross-Sectional Dimension: 5mm; Condition: In coils, annealed; Use: For manufacturing cable conductors; Brand: None; Model: Diameter 5mm; Origin: China. Misreporting aluminum alloy wire as non-alloyed aluminum wire, leading to classification errors. Failure to accurately measure the maximum cross-sectional dimension, possibly misclassifying under 760511. Ignoring condition description, such as the difference between coiled and straight bars affecting classification.

Core basis for classification: 1) Material is non-alloyed aluminum, i.e., aluminum content ≥99.5% (by weight); 2) Product form is wire, usually in coils, with solid cross-section; 3) Maximum cross-sectional dimension ≤7mm. It is necessary to combine the Explanatory Notes to the Tariff and customs classification decisions to confirm the boundary between non-alloyed and alloyed, and the difference between wire and bars, rods. 760511 Wire of non-alloyed aluminum, max cross-sectional dimension >7mm: Dimension is the only difference; exceeding 7mm is classified under 760511, not exceeding under 760519. 760521 Wire of aluminum alloys, max cross-sectional dimension >7mm: Material is aluminum alloy, and dimension >7mm, differing from 760519 in both material and dimension. 760529 Wire of aluminum alloys, max cross-sectional dimension ≤7mm: Material is aluminum alloy, dimension ≤7mm, differing from 760519 only in material. 7604 Aluminum bars, rods, profiles: Aluminum bars and rods are usually straight, non-coiled, with larger cross-sectional dimensions; aluminum wire is coiled, classified under 7605. 7614 Stranded wire, cables, plaited bands of aluminum: Stranded wire etc. are made by twisting multiple aluminum wires together, classified under 7614, while single aluminum wire is classified under 7605. Is the material non-alloyed aluminum (aluminum content ≥99.5%)? Is the product in coils or in wire form? Is the maximum cross-sectional dimension ≤7mm? Are stranded wire, cables, etc. excluded? Is it distinguished from aluminum bars, rods?

How to query the tariff rate for 760519? The tariff rate depends on origin, trade agreements, etc. It can be queried through the official website of the General Administration of Customs of China, the International Trade Single Window, or professional databases. Note that rates may change; it is recommended to refer to the latest published "Import and Export Tariff". How to distinguish non-alloyed aluminum wire from aluminum alloy wire? Non-alloyed aluminum wire refers to aluminum content ≥99.5%, without other alloying elements or with very low content; aluminum alloy wire contains a certain amount of other elements (such as copper, magnesium, silicon, etc.) to improve performance. It can be confirmed through material certificates or assay reports. How to measure the maximum cross-sectional dimension? For circular cross-sections, measure the diameter; for non-circular cross-sections, measure the maximum cross-sectional dimension. Use precision measuring tools to ensure accuracy. If the dimension is close to 7mm, it is recommended to take multiple measurements and average them. What is the classification difference between aluminum wire and aluminum bars, rods? Aluminum wire is usually coiled, with smaller cross-sectional dimensions, classified under 7605; aluminum bars and rods are usually straight, non-coiled, with larger cross-sectional dimensions, classified under 7604. However, the key depends on product form and processing state. Is a material certificate required for declaration? It is recommended to attach a material certificate or assay report to prove aluminum content and alloying elements, avoiding classification disputes. Customs may require it, especially when there are doubts about the boundary between non-alloyed and alloyed. Does 760519 apply to all non-alloyed aluminum wire? It only applies to non-alloyed aluminum wire with a maximum cross-sectional dimension ≤7mm. If the dimension >7mm, it should be classified under 760511. In addition, if the aluminum wire has undergone further processing (such as coating, stranding), it may be classified under other codes. If the aluminum wire is used for cables, are there special classification provisions? If the aluminum wire used for cables is a single strand, it is still classified under 7605; if it has been stranded or made into cables, it is classified under 8544. Classification depends on the degree of processing; unstranded single wire is classified as aluminum wire. What regulatory documents are required for importing aluminum wire? Generally, basic documents such as import declaration form, contract, invoice, packing list, and bill of lading are required. Depending on origin and trade policy, a certificate of origin, quality inspection certificate, etc. may be required. Specific requirements are subject to customs.