Chapter 72 covers iron and steel and articles thereof, including pig iron, ferroalloys, ferrous waste and scrap, ingots, semi-finished products, flat-rolled products, long products, tubes, etc. This chapter is one of the most important metal chapters in international trade, involving the complete steel industry chain from raw materials to finished products. HS code 721912 is located in this chapter, belonging to the category of flat-rolled stainless steel products, which is a core category in steel trade. Heading 7219 specifically refers to flat-rolled stainless steel products, of a width of 600mm or more, covering hot-rolled, cold-rolled and further processed products. Under this heading, products are further subdivided by thickness, processing state (hot-rolled/cold-rolled), whether pickled, whether further processed, etc. 721912 specifically refers to hot-rolled stainless steel plate, of a thickness between 4.75mm and 10mm, not further worked than hot-rolled, and is a commonly used material in industrial and construction fields. First 2 digits 72: Chapter 72 iron and steel, covering products across the entire steel industry chain. Digits 3-4: 19: Heading 7219, flat-rolled stainless steel products, of a width of 600mm or more. Digits 5-6: 12: Subheading 721912, hot-rolled stainless steel plate, of a thickness of 4.75mm ≤ thickness < 10mm, not further worked than hot-rolled. Note: Subheadings are layered by thickness, 721911 for thickness > 10mm, 721912 for 4.75-10mm, 721913 for 3-4.75mm, 721914 for < 3mm. This commodity is hot-rolled stainless steel plate, of a width of 600mm or more, of a thickness between 4.75-10mm, and not pickled, cold-rolled or otherwise further processed, conforming to the description of subheading 721912. If the thickness is > 10mm, it should be classified under 721911; if the thickness is < 4.75mm, it should be classified under 721913 or 721914. If it has been pickled or cold-rolled, it should be classified under other subheadings or headings.
Chapter
Chapter 72 covers iron and steel and articles thereof, including pig iron, ferroalloys, ferrous waste and scrap, ingots, semi-finished products, flat-rolled products, long products, tubes, etc. This chapter is one of the most important metal chapters in international trade, involving the complete steel industry chain from raw materials to finished products. HS code 721912 is located in this chapter, belonging to the category of flat-rolled stainless steel products, which is a core category in steel trade.
Heading
Heading 7219 specifically refers to flat-rolled stainless steel products, of a width of 600mm or more, covering hot-rolled, cold-rolled and further processed products. Under this heading, products are further subdivided by thickness, processing state (hot-rolled/cold-rolled), whether pickled, whether further processed, etc. 721912 specifically refers to hot-rolled stainless steel plate, of a thickness between 4.75mm and 10mm, not further worked than hot-rolled, and is a commonly used material in industrial and construction fields.
Digit Breakdown
First 2 digits 72: Chapter 72 iron and steel, covering products across the entire steel industry chain. Digits 3-4: 19: Heading 7219, flat-rolled stainless steel products, of a width of 600mm or more. Digits 5-6: 12: Subheading 721912, hot-rolled stainless steel plate, of a thickness of 4.75mm ≤ thickness < 10mm, not further worked than hot-rolled. Note: Subheadings are layered by thickness, 721911 for thickness > 10mm, 721912 for 4.75-10mm, 721913 for 3-4.75mm, 721914 for < 3mm.
Classification Basis
This commodity is hot-rolled stainless steel plate, of a width of 600mm or more, of a thickness between 4.75-10mm, and not pickled, cold-rolled or otherwise further processed, conforming to the description of subheading 721912. If the thickness is > 10mm, it should be classified under 721911; if the thickness is < 4.75mm, it should be classified under 721913 or 721914. If it has been pickled or cold-rolled, it should be classified under other subheadings or headings.
📝 Declaration Elements
Product Name: The declared commodity name should accurately reflect the material and processing state, such as 'hot-rolled stainless steel plate'. Material: The grade or composition of stainless steel, such as 304, 316L, etc., must comply with international or domestic standards. Specifications and Dimensions: Thickness, width, length (if plate), thickness accurate to the millimeter, width must indicate whether it is ≥ 600mm. Processing State: Clearly state hot-rolled, not pickled, not cold-rolled, not further processed. Shape: Plate or coil; if coil, it must be indicated, but 721912 is usually plate. Use: Main use, such as construction, chemical, shipbuilding, etc., to assist classification. Brand or Manufacturer: If there is a brand or manufacturer, it must be declared, for price review and origin determination. Product Name: Hot-rolled stainless steel plate; Material: 304 stainless steel; Specifications: Thickness 6mm, Width 1500mm, Length 6000mm; Processing State: Hot-rolled, not pickled, not cold-rolled; Shape: Plate; Use: For chemical equipment manufacturing; Brand: TISCO. Thickness unit mistakenly declared as centimeters, leading to incorrect subheading. Failure to indicate whether width is ≥ 600mm, possibly classified under other headings. Hot-rolled plate that has been pickled mistakenly declared as not pickled, affecting classification.
Product Name
The declared commodity name should accurately reflect the material and processing state, such as 'hot-rolled stainless steel plate'.
⚠️ Mistakenly written as 'stainless steel coil' or 'cold-rolled plate', ignoring the hot-rolled state.
Material
The grade or composition of stainless steel, such as 304, 316L, etc., must comply with international or domestic standards.
⚠️ Only writing 'stainless steel' without specifying the grade, leading to classification disputes.
Specifications and Dimensions
Thickness, width, length (if plate), thickness accurate to the millimeter, width must indicate whether it is ≥ 600mm.
⚠️ Incorrect thickness units (e.g., centimeters mistaken for millimeters), or failure to indicate width.
Processing State
Clearly state hot-rolled, not pickled, not cold-rolled, not further processed.
⚠️ Vaguely writing 'hot-rolled' without specifying whether pickled, which may affect the subheading.
Shape
Plate or coil; if coil, it must be indicated, but 721912 is usually plate.
⚠️ Coil mistakenly declared as plate, leading to classification errors.
Use
Main use, such as construction, chemical, shipbuilding, etc., to assist classification.
⚠️ Use description too broad, such as 'industrial use', lacking specificity.
Brand or Manufacturer
If there is a brand or manufacturer, it must be declared, for price review and origin determination.
⚠️ Ignoring the brand, leading to customs valuation queries.
Example： Product Name: Hot-rolled stainless steel plate; Material: 304 stainless steel; Specifications: Thickness 6mm, Width 1500mm, Length 6000mm; Processing State: Hot-rolled, not pickled, not cold-rolled; Shape: Plate; Use: For chemical equipment manufacturing; Brand: TISCO.
Common Mistakes：
Thickness unit mistakenly declared as centimeters, leading to incorrect subheading.
Failure to indicate whether width is ≥ 600mm, possibly classified under other headings.
Hot-rolled plate that has been pickled mistakenly declared as not pickled, affecting classification.
🎯 Classification Logic
Core basis for classification: 1) Material is stainless steel; 2) Flat-rolled product, of a width of 600mm or more; 3) Hot-rolled, not further worked than hot-rolled; 4) Thickness between 4.75mm and 10mm. All these conditions must be met simultaneously to be classified under 721912. If the width is < 600mm, it is classified under 7220; if pickled, cold-rolled or coated, it is classified under other subheadings of 7219 or 7220. 721911 Hot-rolled stainless steel plate, thickness > 10mm: Different thickness; 721911 is for thickness exceeding 10mm, while 721912 is for 4.75-10mm. 721913 Hot-rolled stainless steel plate, thickness 3-4.75mm: Different thickness range; 721913 is for 3mm to 4.75mm, while 721912 is for 4.75-10mm. 721914 Hot-rolled stainless steel plate, thickness < 3mm: Thickness less than 3mm, classified under 721914, while 721912 has thickness ≥ 4.75mm. 721921 Hot-rolled stainless steel plate, pickled, thickness > 10mm: Pickled, different processing state, classified under other subheadings of 7219. 722011 Hot-rolled stainless steel narrow strip, width < 600mm, thickness ≥ 4.75mm: Width less than 600mm, classified under 7220, while 721912 has width ≥ 600mm. Confirm the material is stainless steel. Confirm the width is ≥ 600mm. Confirm the processing state is hot-rolled and not pickled. Confirm the thickness is between 4.75-10mm. Confirm the shape is plate rather than coil.
Basis
Core basis for classification: 1) Material is stainless steel; 2) Flat-rolled product, of a width of 600mm or more; 3) Hot-rolled, not further worked than hot-rolled; 4) Thickness between 4.75mm and 10mm. All these conditions must be met simultaneously to be classified under 721912. If the width is < 600mm, it is classified under 7220; if pickled, cold-rolled or coated, it is classified under other subheadings of 7219 or 7220.
Width less than 600mm, classified under 7220, while 721912 has width ≥ 600mm.
Self-Check：
✓ Confirm the material is stainless steel.
✓ Confirm the width is ≥ 600mm.
✓ Confirm the processing state is hot-rolled and not pickled.
✓ Confirm the thickness is between 4.75-10mm.
✓ Confirm the shape is plate rather than coil.
❓ FAQ
How to inquire about the import tariff rate for 721912? You can inquire through the official website of the General Administration of Customs of China or the International Trade Single Window by entering HS code 721912 to view the MFN rate, general rate, VAT rate, etc. Tariff rates are subject to policy adjustments, and the latest published rates should prevail. What is the main difference between 721912 and 721913? The main difference lies in thickness: 721912 has a thickness of 4.75mm to 10mm, while 721913 has a thickness of 3mm to 4.75mm. When classifying, the thickness must be accurately measured, and unit conversion should be noted. Which code should hot-rolled stainless steel plate be classified under after pickling? Pickled hot-rolled stainless steel plate, if of a width of 600mm or more, should be classified under other subheadings of 7219, such as 721921 (thickness > 10mm) or 721922 (4.75-10mm), etc. The specific classification depends on thickness and processing state. How does width affect classification at the time of declaration? Width is a key classification factor: width ≥ 600mm is classified under 7219, width < 600mm is classified under 7220. The width must be accurately stated at the time of declaration to avoid classification errors. Does 721912 include stainless steel coil? 721912 usually refers to plate, but if it is hot-rolled coil, of a width of 600mm or more, thickness 4.75-10mm, not further worked, it may also be classified under this code. However, attention must be paid to the difference between coil and plate at the time of declaration. How to distinguish between hot-rolled and cold-rolled stainless steel plate? Hot-rolled plate has a rougher surface with oxide scale and greater thickness; cold-rolled plate has a smooth surface and thinner thickness. Classification should be determined based on the processing technique and surface condition. What is the export tax rebate rate for 721912? The export tax rebate rate should be inquired according to the latest policy, which can be obtained through the website of the State Taxation Administration or the General Administration of Customs. The rebate rate may be adjusted in different periods, and it is recommended to consult a professional customs broker. What are the consequences of filling in the wrong material grade at the time of declaration? Incorrect material grade may lead to classification errors, incorrect application of tariff rates, and even suspected false declaration, resulting in customs penalties. Be sure to fill in accurately according to the actual material.
Q: How to inquire about the import tariff rate for 721912?
A: You can inquire through the official website of the General Administration of Customs of China or the International Trade Single Window by entering HS code 721912 to view the MFN rate, general rate, VAT rate, etc. Tariff rates are subject to policy adjustments, and the latest published rates should prevail.
Q: What is the main difference between 721912 and 721913?
A: The main difference lies in thickness: 721912 has a thickness of 4.75mm to 10mm, while 721913 has a thickness of 3mm to 4.75mm. When classifying, the thickness must be accurately measured, and unit conversion should be noted.
Q: Which code should hot-rolled stainless steel plate be classified under after pickling?
A: Pickled hot-rolled stainless steel plate, if of a width of 600mm or more, should be classified under other subheadings of 7219, such as 721921 (thickness > 10mm) or 721922 (4.75-10mm), etc. The specific classification depends on thickness and processing state.
Q: How does width affect classification at the time of declaration?
A: Width is a key classification factor: width ≥ 600mm is classified under 7219, width < 600mm is classified under 7220. The width must be accurately stated at the time of declaration to avoid classification errors.
Q: Does 721912 include stainless steel coil?
A: 721912 usually refers to plate, but if it is hot-rolled coil, of a width of 600mm or more, thickness 4.75-10mm, not further worked, it may also be classified under this code. However, attention must be paid to the difference between coil and plate at the time of declaration.
Q: How to distinguish between hot-rolled and cold-rolled stainless steel plate?
A: Hot-rolled plate has a rougher surface with oxide scale and greater thickness; cold-rolled plate has a smooth surface and thinner thickness. Classification should be determined based on the processing technique and surface condition.
Q: What is the export tax rebate rate for 721912?
A: The export tax rebate rate should be inquired according to the latest policy, which can be obtained through the website of the State Taxation Administration or the General Administration of Customs. The rebate rate may be adjusted in different periods, and it is recommended to consult a professional customs broker.
Q: What are the consequences of filling in the wrong material grade at the time of declaration?
A: Incorrect material grade may lead to classification errors, incorrect application of tariff rates, and even suspected false declaration, resulting in customs penalties. Be sure to fill in accurately according to the actual material.
⚠️ Disclaimer: HS code classification, declaration elements, tariff rates and regulatory conditions on this page are for reference only and do not constitute legal advice on customs classification. Tariff rates and regulations are subject to change; the latest announcements from the General Administration of Customs and on-site determinations shall prevail. Please consult professional customs brokers or customs authorities before import/export.