Chapter 39 covers plastics and articles thereof, and is an important chapter in the HS classification system organized by material. This chapter includes plastics in primary forms (such as resins and pellets), semi-manufactures (such as plates, sheets, film, foil, and strips), and various finished plastic articles. However, not all plastic products are classified in this chapter; some products are classified in other chapters due to their function or use (e.g., plastic footwear in Chapter 64, plastic toys in Chapter 95). The arrangement logic of this chapter is to classify first by material form (primary forms, semi-manufactures), and then by type of finished product. Heading 3925 specifically covers builders' ware of plastics, not elsewhere specified or included, including grilles, similar fixtures, doors, windows and their frames, thresholds, shutters, similar articles and fittings. The core of this heading is 'builders' ware of plastics,' that is, plastic components used for fixed installation in buildings. Grilles and similar fixtures generally refer to plastic structural components used for support, fixation, partitioning, or decoration, such as shelf grilles, wall mounting brackets, pipe supports, etc., but articles dedicated to specific uses such as electrical or furniture applications must be excluded. Code 392560 is a 6-digit subheading: the first 2 digits '39' represent Chapter 39 (plastics and articles thereof); digits 3-4 '25' represent heading 3925 (builders' ware of plastics, not elsewhere specified or included); digits 5-6 '60' represent subheading 392560, namely 'grilles and similar fixtures of plastics.' This subheading is further limited to grilles and similar fixtures, distinguishing it from other builders' ware of plastics under 3925 such as doors, windows, and shutters. In HS classification, the 6-digit subheading is an internationally uniform code; countries may add additional digits after it for domestic subdivision, but the first 6 digits are consistent globally. The key reason this product is classified under 392560 rather than adjacent codes is that its material is plastic and its use is as a builders' fixture. If it were a metal grille, it should be classified in Chapter 73 (e.g., 7326); if it were a wooden grille, it would be classified in Chapter 44 (e.g., 4421). In addition, if a plastic grille is dedicated to furniture (such as a grille inside a wardrobe), it may be classified under 9403; if used for electrical wiring, it would be classified under 8547. Therefore, 392560 applies to plastic grilles and fixtures for general building scenarios that are not otherwise specifically named.
Chapter
Chapter 39 covers plastics and articles thereof, and is an important chapter in the HS classification system organized by material. This chapter includes plastics in primary forms (such as resins and pellets), semi-manufactures (such as plates, sheets, film, foil, and strips), and various finished plastic articles. However, not all plastic products are classified in this chapter; some products are classified in other chapters due to their function or use (e.g., plastic footwear in Chapter 64, plastic toys in Chapter 95). The arrangement logic of this chapter is to classify first by material form (primary forms, semi-manufactures), and then by type of finished product.
Heading
Heading 3925 specifically covers builders' ware of plastics, not elsewhere specified or included, including grilles, similar fixtures, doors, windows and their frames, thresholds, shutters, similar articles and fittings. The core of this heading is 'builders' ware of plastics,' that is, plastic components used for fixed installation in buildings. Grilles and similar fixtures generally refer to plastic structural components used for support, fixation, partitioning, or decoration, such as shelf grilles, wall mounting brackets, pipe supports, etc., but articles dedicated to specific uses such as electrical or furniture applications must be excluded.
Digit Breakdown
Code 392560 is a 6-digit subheading: the first 2 digits '39' represent Chapter 39 (plastics and articles thereof); digits 3-4 '25' represent heading 3925 (builders' ware of plastics, not elsewhere specified or included); digits 5-6 '60' represent subheading 392560, namely 'grilles and similar fixtures of plastics.' This subheading is further limited to grilles and similar fixtures, distinguishing it from other builders' ware of plastics under 3925 such as doors, windows, and shutters. In HS classification, the 6-digit subheading is an internationally uniform code; countries may add additional digits after it for domestic subdivision, but the first 6 digits are consistent globally.
Classification Basis
The key reason this product is classified under 392560 rather than adjacent codes is that its material is plastic and its use is as a builders' fixture. If it were a metal grille, it should be classified in Chapter 73 (e.g., 7326); if it were a wooden grille, it would be classified in Chapter 44 (e.g., 4421). In addition, if a plastic grille is dedicated to furniture (such as a grille inside a wardrobe), it may be classified under 9403; if used for electrical wiring, it would be classified under 8547. Therefore, 392560 applies to plastic grilles and fixtures for general building scenarios that are not otherwise specifically named.
📝 Declaration Elements
Product name: The standard name of the declared commodity should be accurately described as 'plastic grille' or 'plastic fixture,' avoiding the vague 'plastic product.' Material: Clearly specify the type of plastic, such as polyethylene (PE), polypropylene (PP), polyvinyl chloride (PVC), etc., and whether it contains reinforcing materials (such as glass fiber). Use: Explain the specific usage scenario, such as 'for fixing to building walls,' 'for partitioning warehouse shelves,' etc., and it must reflect the building-use attribute. Specifications and dimensions: Provide length, width, thickness, and other dimensional information, as well as parameters such as load-bearing capacity, to facilitate customs assessment of the product's characteristics. Brand: Declare the brand name (if any); if there is no brand, indicate 'unbranded.' Model: Declare the product model or item number to facilitate identification and traceability. Processing technique: Briefly describe the molding process, such as injection molding, extrusion, blow molding, etc., and whether surface treatment has been applied. Product name: plastic grille; Material: polypropylene (PP); Use: for fixed support on building walls; Specifications: length 500mm × width 300mm × thickness 20mm; Brand: unbranded; Model: GR-2024; Processing technique: injection molding. Incorrectly declaring a builders' plastic grille as a furniture plastic grille, resulting in classification under 9403. Writing only 'plastic' for the material without specifying the specific type, which may result in a request for supplementary declaration. The use description is too general, such as 'for fixing,' without reflecting the building scenario, causing classification disputes.
Product name
The standard name of the declared commodity should be accurately described as 'plastic grille' or 'plastic fixture,' avoiding the vague 'plastic product.'
⚠️ Incorrectly declaring it as 'plastic accessory' or 'plastic rack,' resulting in ambiguous classification.
Material
Clearly specify the type of plastic, such as polyethylene (PE), polypropylene (PP), polyvinyl chloride (PVC), etc., and whether it contains reinforcing materials (such as glass fiber).
⚠️ Writing only 'plastic' without specifying the specific composition, affecting classification and document review.
Use
Explain the specific usage scenario, such as 'for fixing to building walls,' 'for partitioning warehouse shelves,' etc., and it must reflect the building-use attribute.
⚠️ Describing the use as 'for furniture' or 'for electrical use,' which may lead to classification under other headings.
Specifications and dimensions
Provide length, width, thickness, and other dimensional information, as well as parameters such as load-bearing capacity, to facilitate customs assessment of the product's characteristics.
⚠️ Not providing dimensions and writing only 'multiple specifications,' affecting inspection and classification.
Brand
Declare the brand name (if any); if there is no brand, indicate 'unbranded.'
⚠️ Omitting the brand or incorrectly declaring 'unbranded' when there is actually a trademark.
Model
Declare the product model or item number to facilitate identification and traceability.
⚠️ Incomplete model entry or inconsistency with the actual product.
Processing technique
Briefly describe the molding process, such as injection molding, extrusion, blow molding, etc., and whether surface treatment has been applied.
⚠️ Not specifying the process, which may affect judgment of the commodity's state.
Example： Product name: plastic grille; Material: polypropylene (PP); Use: for fixed support on building walls; Specifications: length 500mm × width 300mm × thickness 20mm; Brand: unbranded; Model: GR-2024; Processing technique: injection molding.
Common Mistakes：
Incorrectly declaring a builders' plastic grille as a furniture plastic grille, resulting in classification under 9403.
Writing only 'plastic' for the material without specifying the specific type, which may result in a request for supplementary declaration.
The use description is too general, such as 'for fixing,' without reflecting the building scenario, causing classification disputes.
🎯 Classification Logic
The core criteria for classification are: 1) whether the material is plastic; 2) whether it is builders' ware; 3) whether there is a more specific heading elsewhere. According to the Import and Export Tariff and its notes, 3925 covers builders' ware of plastics, not elsewhere specified or included, including grilles and similar fixtures. If the grille is dedicated to furniture, electrical equipment, vehicles, etc., it is preferentially classified under the corresponding chapter. Therefore, it is necessary to focus on reviewing the product's use, installation location, and function to ensure it meets the definition of 'builders' ware.' 392590 Other builders' ware of plastics: 392590 is a residual subheading under 3925, covering other builders' ware of plastics not specifically named. If a grille has special functions (such as adjustable or lockable), it may be classified under 392590 rather than 392560. 940370 Plastic furniture: 940370 covers plastic furniture and parts thereof. If a grille is dedicated to furniture (such as a grille inside a wardrobe or a cabinet divider), it should be classified under 940370, not 392560. 732690 Other articles of iron or steel: 732690 covers articles of iron or steel not elsewhere specified. If the grille is made of iron or steel, even if similar in shape, it should be classified under 732690, not 392560. 854720 Insulating fittings of plastics: 854720 covers insulating fittings of plastics for electrical equipment. If the grille is used for fixing electrical wiring or insulation, it should be classified under 854720, not 392560. Is the material plastic? Is it used for building fixation or support? Is it dedicated to specific fields such as furniture or electrical use? Is there a more specific heading elsewhere? Are the declaration elements complete and accurate?
Basis
The core criteria for classification are: 1) whether the material is plastic; 2) whether it is builders' ware; 3) whether there is a more specific heading elsewhere. According to the Import and Export Tariff and its notes, 3925 covers builders' ware of plastics, not elsewhere specified or included, including grilles and similar fixtures. If the grille is dedicated to furniture, electrical equipment, vehicles, etc., it is preferentially classified under the corresponding chapter. Therefore, it is necessary to focus on reviewing the product's use, installation location, and function to ensure it meets the definition of 'builders' ware.'
Confused Codes：
392590 - Other builders' ware of plastics
392590 is a residual subheading under 3925, covering other builders' ware of plastics not specifically named. If a grille has special functions (such as adjustable or lockable), it may be classified under 392590 rather than 392560.
940370 - Plastic furniture
940370 covers plastic furniture and parts thereof. If a grille is dedicated to furniture (such as a grille inside a wardrobe or a cabinet divider), it should be classified under 940370, not 392560.
732690 - Other articles of iron or steel
732690 covers articles of iron or steel not elsewhere specified. If the grille is made of iron or steel, even if similar in shape, it should be classified under 732690, not 392560.
854720 - Insulating fittings of plastics
854720 covers insulating fittings of plastics for electrical equipment. If the grille is used for fixing electrical wiring or insulation, it should be classified under 854720, not 392560.
Self-Check：
✓ Is the material plastic?
✓ Is it used for building fixation or support?
✓ Is it dedicated to specific fields such as furniture or electrical use?
✓ Is there a more specific heading elsewhere?
✓ Are the declaration elements complete and accurate?
❓ FAQ
How can I check the import tariff rate for 392560? It can be checked through the official website of the General Administration of Customs, China International Trade Single Window, or the Import and Export Tariff. Tariff rates vary by country, trade agreement (such as RCEP), and origin of goods, so it is recommended to rely on the feedback from the customs system at the time of declaration. If a plastic grille is used for warehouse shelving, should it be classified under 392560 or 9403? If the shelving is independent furniture, classify it under 9403; if the grille is a builders' fixture (such as a support grille fixed to a wall), classify it under 392560. The key is whether it is movable and whether it is dedicated to furniture. What is the difference between 392560 and 392590? 392560 specifically names 'grilles and similar fixtures,' while 392590 is for other builders' ware of plastics not elsewhere named. If the product is clearly a grille, it is preferentially classified under 392560; if it is another plastic building component (such as a cover plate or junction box), classify it under 392590. How should the material be filled in during declaration? The specific type of plastic should be filled in, such as polyethylene (PE), polypropylene (PP), etc., and indicate whether it contains reinforcing materials. Writing only 'plastic' may result in a request for supplementary declaration, affecting customs clearance efficiency. If a plastic grille is exported to the EU, is the HS code the same? The first 6 digits 392560 are consistent in the EU, but the EU may extend to 8 or 10 digits for subdivision. When exporting, it is necessary to confirm the EU TARIC code and comply with local regulations. How should a plastic grille with metal fittings be classified? If the metal fittings are only auxiliary (such as screws), the whole product is still classified as a plastic article; if the metal part constitutes the essential character, it may be classified under the chapter for metal articles. Judgment should be based on actual function. What are the regulatory conditions for 392560? Regulatory conditions vary by country. In China, there are generally no special regulatory conditions, but it may involve commodity inspection, CCC certification, etc. The specific regulatory condition codes issued by customs shall prevail, and it is recommended to check the latest regulations before declaration. What are the consequences of incorrect classification? It may lead to tax recovery, fines, downgrading of credit rating, or even suspicion of smuggling. Enterprises are advised to strengthen classification review and, when necessary, apply for advance classification to ensure compliance.
Q: How can I check the import tariff rate for 392560?
A: It can be checked through the official website of the General Administration of Customs, China International Trade Single Window, or the Import and Export Tariff. Tariff rates vary by country, trade agreement (such as RCEP), and origin of goods, so it is recommended to rely on the feedback from the customs system at the time of declaration.
Q: If a plastic grille is used for warehouse shelving, should it be classified under 392560 or 9403?
A: If the shelving is independent furniture, classify it under 9403; if the grille is a builders' fixture (such as a support grille fixed to a wall), classify it under 392560. The key is whether it is movable and whether it is dedicated to furniture.
Q: What is the difference between 392560 and 392590?
A: 392560 specifically names 'grilles and similar fixtures,' while 392590 is for other builders' ware of plastics not elsewhere named. If the product is clearly a grille, it is preferentially classified under 392560; if it is another plastic building component (such as a cover plate or junction box), classify it under 392590.
Q: How should the material be filled in during declaration?
A: The specific type of plastic should be filled in, such as polyethylene (PE), polypropylene (PP), etc., and indicate whether it contains reinforcing materials. Writing only 'plastic' may result in a request for supplementary declaration, affecting customs clearance efficiency.
Q: If a plastic grille is exported to the EU, is the HS code the same?
A: The first 6 digits 392560 are consistent in the EU, but the EU may extend to 8 or 10 digits for subdivision. When exporting, it is necessary to confirm the EU TARIC code and comply with local regulations.
Q: How should a plastic grille with metal fittings be classified?
A: If the metal fittings are only auxiliary (such as screws), the whole product is still classified as a plastic article; if the metal part constitutes the essential character, it may be classified under the chapter for metal articles. Judgment should be based on actual function.
Q: What are the regulatory conditions for 392560?
A: Regulatory conditions vary by country. In China, there are generally no special regulatory conditions, but it may involve commodity inspection, CCC certification, etc. The specific regulatory condition codes issued by customs shall prevail, and it is recommended to check the latest regulations before declaration.
Q: What are the consequences of incorrect classification?
A: It may lead to tax recovery, fines, downgrading of credit rating, or even suspicion of smuggling. Enterprises are advised to strengthen classification review and, when necessary, apply for advance classification to ensure compliance.
⚠️ Disclaimer: HS code classification, declaration elements, tariff rates and regulatory conditions on this page are for reference only and do not constitute legal advice on customs classification. Tariff rates and regulations are subject to change; the latest announcements from the General Administration of Customs and on-site determinations shall prevail. Please consult professional customs brokers or customs authorities before import/export.